there is a special chrysler puller needed for that particular balancer...its available through mac tools and snap on...you may be find it through canadian tire or napa even...try that...
I have a 1999 300M. It had a hard time starting twice today. The engine wouldn't turn over, and when...
(More)
I have a 1999 300M. It had a hard time starting twice today. The engine wouldn't turn over, and when it finally did, it shuddered real bad. After revving the engine up to 2500 rpm, the shuddering stopped for the most part. The oil pressure light flickered for a minute but went off. I checked the oil, and the level is fine. What gives?
vibrate when started but stop while driving, but today i smelt oil buring when i shut the car off....
(More)
vibrate when started but stop while driving, but today i smelt oil buring when i shut the car off. Could this be Gaskets or spark plugs.
I have problems with the engine heating up. If the temperature is below 15 degrees and it has been...
(More)
I have problems with the engine heating up. If the temperature is below 15 degrees and it has been sitting outside it takes forever for the heat to heat up. I have a 1999 chrysler 300M. You may e-mail me at sher1122@msn.com.
leaking antifreese under car think it could be frost plug and head problem its leaking on bottom but...
(More)
leaking antifreese under car think it could be frost plug and head problem its leaking on bottom but in middle by the pan