follow the two hoses up from the water pump until you find where they connect to the firewall, undo both hoses and remove can't say for sure but I remember it comes out from under the Dash or from the firewall you will discover this when you start the process or before attempting this look at the situation to be sure you can do it .. I hope this helps you somewhat to get an idea.
Comments:
Nov 06, 2009
- Thanks and unfortunately there is no easy method ...is the heater core bad leaking or merely plugged ? ..if it is merely plugged you can remove both hoses to apply a garden hose and flush the gunk out from the bottom outlet in which case you would be back-flushing it ...or is the core leaking at which point , yeah you'll have a bit of work ahead of you ...peace and good luck
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
Good enough, but already had that figured out, was looking for a easy guide of somesort, thanks tho
" - Killinger86
Can someone please tell me how to reconnect the center console which houes a electronic compass and...
(More)
Can someone please tell me how to reconnect the center console which houes a electronic compass and gear shift back up in my 1989 pontiac grandprix it use to work i think it has to be plugged in to what i dont know and which fuse also controls it. Thank you ever so much
in my 1997 Pontiac Grand Prix we received code of #6 misfire. We replaced the spark plug, and now it...
(More)
in my 1997 Pontiac Grand Prix we received code of #6 misfire. We replaced the spark plug, and now it just runs so rough and loud.
the sensor on the side of the transmission housing has fell inside the transbell housing what are...
(More)
the sensor on the side of the transmission housing has fell inside the transbell housing what are your recomm. for getting it out and is there a retainer clip of some sort that goes on it and can that be the reason i'm getting no fire to the plugs?????