Expert
(602) 909-6450
Answer
have dtc 1351, along w/ 0300, truck acts like it's out of time at idle and when there's a load on...
(More)
Problem for GMC 1998 Sierra
I have a code 1345 set each start cycle. I can
Solution #1
posted on Nov 07, 2009
Hello,
Ok it appears you have a cmp corelation offset code. If you have a scanner you can check the timing if not you will need one. This code usually sets when you have more than 16 degrees offset. the specification is 0 degrees CMP ****** +- 2 degrees. It is also possible you have worn teeth on the distributor (sharp edges) this will cause it to be out of time.
I hope this helps.
Roy
Ok it appears you have a cmp corelation offset code. If you have a scanner you can check the timing if not you will need one. This code usually sets when you have more than 16 degrees offset. the specification is 0 degrees CMP ****** +- 2 degrees. It is also possible you have worn teeth on the distributor (sharp edges) this will cause it to be out of time.
I hope this helps.
Roy
Yes
No
Popular Solutions for 1998 GMC Sierra
Questions and Unsolved Problems for 1998 GMC Sierra
Do you recommend GMC 1998 Sierra?
Answer
Answer
i have an 1999 sierra, the problem is that the headlights don't came off, even if i trie to push the...
(More)
Answer
I need to replace the driver side interior door handle on a 1998 GMC Sierra. I need instructions
Answer
I have been trying to install my Sierra Civil War computer game and it will not install...how do I...
(More)
Ask our Experts
Featured Parts
Parts for your 1998 GMC Sierra
Powered by
Browse popular Problems
More Common Problems
Most Common Problems for:
For 1998 GMC Sierra:
Related Products & Issues:
Top Car Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Car Repair
