If this occurs only when hot check for spark if there is no spark on all cylinders the problem may be the ignition module under the 3 ign coils. also check the crank position sensor for contact with the reluctor on the harmonic ballancer , this is on the lowest pulley for the serpentine belt near the bottom of the engine . DO NOT REMOVE the sensor for inspection , allignment is critical.. check fuel pressure, should be 30 to 35 psi. should stay between this pressure all the time while running.. if not fuel pump may be faulty...good luck
How do I replace the 3rd brake light bulb in a 1997 Nissan Maxima 4 door sedan.?There is no access...
(More)
How do I replace the 3rd brake light bulb in a 1997 Nissan Maxima 4 door sedan.?There is no access from inside the trunk and appears that you need to remove the brake light housing, mounted under the rear window, to access the bulb(?) How is this done? There are no obvious screws.