What kind of power steering fluid can you put into

1. Pentosin 11S Synthetic Mineral Base Audi Power Steering Fluid

Bilstein 7.1 Mineral Base Audi Power Steering Fluid

Type of hydraulic fluid: G 002 000. Capacity 0,7 liters.

1. On the left side of the car, remove the green cap with engine switched "OFF" bring front wheels to straight ahead position.
2. Wipe dipstick and re-install cap hand tight and remove again.
3. The cap must be screwed on fully to obtain an accurate fluid level reading.
4. Checking with fluid cold: fluid level must be in area of "MIN" marking, up to 2 mm above or below marking.
5. Checking with fluid at operating temperature above approx. 50 Celsius Degree: fluid level must be between "MIN" and "MAX" markings.
6. If there is not enough fluid, it is not sufficient to just top off the fluid. The hydraulic system must also be checked for leaks!