REMOVE DIFF COVER ON 3rd MEMBER THERE WILL BE A SMALL 8mm BOLT REMOVE BOLT SLID PIN OUT PUSH AXLE IN AND REMOVE HORSE CLIP DO SAME FOR OTHER SIDE PUSH AXLE IN REMOVE CLIP. YOU'LL NEED A BEARING PULLER TO REMOVE BEARING INSTALL NEW BEARINGS WITH NEW SEAL, INSTALL BOTH AXLE WITH HORSE CLIPS INSTALL PIN AND 8mm BOLT, COVER AND REFILL.
The other day the alarm of my trucks antitheft system started sounding off for no appearant reason....
(More)
The other day the alarm of my trucks antitheft system started sounding off for no appearant reason. When I tried to disarm it by starting the ignition nothing happened, it just kept going off. While it was going off I disconnected the battery, but now everytime I try revonnect the battery the alarm sounds off again. Any suggestions as to how to disable the antitheft system????
most of the wires are there im just not sure exactly they all go im just try to see after they come...
(More)
most of the wires are there im just not sure exactly they all go im just try to see after they come down the frame rail what needs to be connected to what
problem with 4x4 ground and power locks and windows not able to engage in 4 wheel drive, when it...
(More)
problem with 4x4 ground and power locks and windows not able to engage in 4 wheel drive, when it engages it will not ungage. the windows will not operate and the door locks also