Expert
(800) 262-0795
Find awesome deals on a superior quality Discount...
Answer
Fan switch will not work, how do I remove it?
Problem for Chevrolet 1994 S-10 Blazer
Where is the turn signal relay on a chevy s10
Best Solution
posted on Nov 03, 2009
On 95-97 and 1998, both the turn signal and hazard flashers are located behind the lower dashboard trim just to the left of the cigarette lighter. You can not get to it without taking apart the trim (stupid design). Or you have to drill a 2" diameter hole in the trim with a velcro cover so you would never have to do it again1999 and later it is under the glove compartment
to disassemble it without drilling
It's behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw. Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher. It's shaped like a cylinder with TWO prongs on it.
to disassemble it without drilling
It's behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw. Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher. It's shaped like a cylinder with TWO prongs on it.
Yes
No
Popular Solutions for 1994 Chevrolet S-10 Blazer
Questions and Unsolved Problems for 1994 Chevrolet S-10 Blazer
Do you recommend Chevrolet 1994 S-10 Blazer?
Answer
Answer
my 1990 chevy corica stalls when you give it gas
Answer
i need a diagram for a 1994chevy blazer 4.3
Answer
1990 chevy 5.7 vacuum line diagram
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For 1994 Chevrolet S-10 Blazer:
Top Car Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Car Repair
Best Chevrolets
Recommended by Owners
Recommended by Owners
