1997 Chrysler Concorde
Problem for Chrysler 1997 Concorde

How to remove alternator from 1997 Chrysler




By dianne_dedri on Nov 03, 2009

" "
how to remove alternator from 1997 Chrysler Concorde?

Solution #1

posted on Nov 03, 2009
Not Rated)

ZJLimited

Rank: Guru  Cars  Expert
Rating: 94%, 573 votes
e
3.3L Engine

  1. Disconnect the battery negative - cable.


Fig. Wiring and nut locations



  1. Disconnect the alternator field circuit plug.
  2. Remove the B+ terminal nut and wire.
  3. Loosen the adjusting T-bolt, but do not remove it.
  4. Loosen the pivot bolt, but do not remove it either.
  5. Remove the alternator drive belt.
  6. Remove the adjusting T-bolt, pivot bolt, and mounting bolt, be careful not to loose the spacer.
  7. Remove the alternator.
To install:
  1. Attach the alternator to the support bracket. Tighten all bracket and alternator (except for the wiring nuts) bolts to 40 ft. lbs. (54 Nm).
  2. Install the B+ terminal nut and wire and tighten to 75 inch lbs. (9 Nm).
  3. Install the drive belt onto the alternator pulley. Make certain that the belt is seated correctly on the pulley.
  4. Connect the negative - battery cable.

3.5L Engine

  1. Disconnect the negative battery cable.
  2. Loosen the lower mounting bolt but do not remove it.
  3. Loosen the pivot bolt, but do not remove it.


  1. Loosen the belt adjusting bolt.
  2. Remove the alternator drive belt.
  3. Remove the bracket.
  4. Remove the lower mounting bolt and pivot bolt.
  5. Remove the alternator.
  6. Disconnect the alternator field circuit plug.
  7. Remove the B+ terminal nut and wire.
To install:
  1. Attach the alternator and bracket to the engine, then tighten the mounting bolts to 40 ft. lbs. (54 Nm).
  2. Install the drive belt onto the alternator pulley. Make certain that the belt is seated correctly on the pulley.
  3. Install and tighten the B+ terminal nut and wire to 75 inch lbs. (9 Nm) onto the new alternator.
  4. Connect the alternator field circuit plug.
  5. Connect the negative battery cable.
Hope helped with this (remember rated this help) Good luck.

Was this helpful?
Yes
No

Popular Solutions for 1997 Chrysler Concorde


Questions and Unsolved Problems for 1997 Chrysler Concorde


Do you recommend Chrysler 1997 Concorde?
Answer

Answer
1997 DODGE CONCORD, NO FIRE COMING THROUGH THE PLUGS

Answer
four rings on panel when ignition turned on. Now, have a scrunching sound as if brake pads are... (More)

Answer
non functioning turn signals and flashers

Answer
I got a 97 chrysler HLS was left as spare car for about five month warm the engyne but when i crank... (More)

Answer
how do you remove the tie rod ends from the suspension?


Didn't find what you were looking for?

Describe your Cars problem:




Ask our Experts

 

Solve Your Problem Now!
Chat Live with an Expert
Chat Now
Top Car Experts



Top Car Mechanics
in , PA
(713) 838-2886

(602) 909-6450


       
Solve Your Problem Now!
Chat Live with an Expert
Chat Now

Insert Link
Insert Image
Insert You-Tube clip
Insert List
Insert List
Spell Check

What is this?



Select