i failed the emisson's test. I have a 97 Nissan Maxima. The codes they listed were P0136 and P0325. Can you tell me what these codes mean and possible repair solutions?
change the o2 sensor first & reset the computer the knock sensor don't go bad that easy if you found 2 codes and 1 of them is the knock sensor usually it got trigger by the other code , on the maxima 95-99 changing the knock sensor you do not need to take off the intake manifold .
P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer) P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.
Comments:
Nov 03, 2009
- P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer) P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.
p0136 rear o2 sensor catalic efficiancy, p0325 Knock sensor. Knock sensor is very hard to replace , test your catalytic converto for possible fault or rear o2 sensor. I would go for a cat first and retest
Good luck
How do I replace the 3rd brake light bulb in a 1997 Nissan Maxima 4 door sedan.?There is no access...
(More)
How do I replace the 3rd brake light bulb in a 1997 Nissan Maxima 4 door sedan.?There is no access from inside the trunk and appears that you need to remove the brake light housing, mounted under the rear window, to access the bulb(?) How is this done? There are no obvious screws.
my friend told me the case is sparking plugs. but i don't know whers the sparking plugs are....
(More)
my friend told me the case is sparking plugs. but i don't know whers the sparking plugs are. Normally i can see 3 plugs. but i dont know whers the other three plugs are. please help me to find the place for other three plugs.. (NISSAN MAXIMA 30GV 1997. ENGINE V6) thnax