How do you remove the door panels from a 2001 GMC Sierra pick up

Here is a youtube video , it's easier then me trying to right the steps down ! How To Install Replace Remove Door Panel Chevy Silverado GMC Sierra 03 06...

what are you wanting to know?? the door is panel is still held on with clips, if your wandering why it still wont come off... start from the bottom corner of the door and work your way around. you will know when all of the clips are pulled lose, then just lift the panel up off of the door.

sorry but the panel needs removed, go on be brave its not all that hard to do .adrian,,

Check this porcedure for REMOVE DOOR PANEL (just as reference guide), this is for change mirrors.

Hope helps.

pull your door panel off and unscrew the speaker and disconnect the connectors to speaker 

salvage yard or dealer is the best bet for finding one

Fairly easy to do. Look inside the door handle area and you will see a small round or square plug cover pull it out and you will see a screw behind it, remove the screw. In the pull handle area you will see two more remove them. Check at the bottom of the door and make sure there are none there, generally not. You might have to remove the power window switch and check for a screw under it. Now the door panel will either have body clips holding it to the door or hook fastners, if it has the clips pull out on the door panel to release them then lift up. If it has the hooks just lift up on the door panel watch for wiring attached to the panel so you don't break them.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

u r asking 2 different things if u are working on a gm pick up as they r seperate items... door handle is bolted in, lock uses a clip... remove door panel!