Expert
(713) 838-2886
Answer
clutch pedal sensor bypassed, ignition coil with keys replaced. I learned that this is a security...
(More)
Problem for Chevrolet 1999 S-10 Pickup
1999 4.3 vortec map sensor removal & install,
By jamie_g236 on Oct 31, 2009
1999 4.3 vortec map sensor removal & install, does it just pop out? not sure if its the problem,starts and idles fine, push on the gas and it starts to rev than cuts out, bogs down, let go of the gas and goes right back to a good idle.
Comments:
Oct 31, 2009
- checked cat converter its o.k.Oct 31, 2009
- no check engine lightNov 04, 2009
- maf sensor was the problem, thanks for the asistance.Best Solution
posted on Oct 31, 2009
Could be several different problems things causing this,Disconnect map sensor and try pushing on gas if map is bad problem will be gone or different,you could also have TPS sensor,Distributor problem,or fuel volume problem,Are there any codes set?
Yes
No
Asker's Testimonial
"
p0101 code was stored,maf,cleared it,runs the same,no codes coming back.unpluged map,idles,cuts right out when you gas it.
" - jamie_g236
Popular Solutions for 1999 Chevrolet S-10 Pickup
Questions and Unsolved Problems for 1999 Chevrolet S-10 Pickup
Do you recommend Chevrolet 1999 S-10 Pickup?
Answer
Answer
Replaced the brake power booster now it is stuck in park
Answer
Brakes lock up on fast stops also horn doesnt work after truck is started.Horn works when key is off...
(More)
Answer
99 s-10 4x4 willnot shift into reverse, all others work fine.
Answer
what is the fuel pressure supossed to be for a 1999 chevy 4.3 vortech s-10 pickup
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For 1999 Chevrolet S-10 Pickup:
Related Products & Issues:
Top Car Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Car Repair
Best Chevrolets
Recommended by Owners
Recommended by Owners
