Mazda demio airbag light flashing 2 x slow 6 xfast believe this is code 26 what does this signify and how can we recode please. the car is 2003 1,5 gsi uk spec

Here are some common torque settings for the Mazda Demio with the ZJ engine:

1. Cylinder head bolts - 35-40 Nm (26-30 lb-ft)
2. Main bearing bolts - 54-61 Nm (40-45 lb-ft)
3. Connecting rod bolts - 25-29 Nm (18-21 lb-ft)
4. Camshaft bearing cap bolts - 8-10 Nm (6-7 lb-ft)
5. Intake manifold bolts - 22-25 Nm (16-18 lb-ft)
6. Exhaust manifold bolts - 25-28 Nm (18-21 lb-ft)
7. Flywheel bolts - 78-85 Nm (58-63 lb-ft)

It's important to note that these torque settings may vary depending on the specific year and model of your Mazda Demio. Always refer to your vehicle's service manual for the correct torque specifications.

If it turns on and off with all the others that do it, then thats probably normal.
If you are worried, try asking a mechanic.
Generally in the example of the airbag light, the light turns on, then off to signify that its working.
In my car i can turn the airbag off and then the light stays on to remind me.

Hope this helps

You need to identify the year/model and engine.
Have a look on:

http://www.troublecodes.net/mazda
https://www.engine-light-help.com/mazda-check-engine-light.html

The flashing lights are indicating that there ia problem setting up the airbags at time of iginiton. The problem could be a simple sensor switch in the passender or drive's seat or wiring connection to the seneor or computer or it could actually be the airbag not being detected by the computer. Usually these problem come up in areas where there is high ambient air humidity. suggest a visit to dealersip for a diagnosis of the problem.

My personal suggestion would be to go for these repair catalogs. I know this website www.reliable-store.com that i used to get manuals from, and they have all models online.
I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

Your car is flashing a fault code, Slow flashes are tens, fast flashes are ones.
You need to count the flashes ( fast and slow ) , work out the code number then ring your dealership and ask nicely what the code signifies.
You may need to get your car plugged in to the dealer computer to reset it after the fault is fixed.
Good luck Marshall

Www.airbaglightoff.eu based in westmeath , cheap and plug

there are a quite a few problems associated with the airbag light flashing. The light will flash in long and short frequencies, this is a diagnostic code, e.g. two long flashes followed by six short flashes equals code 26, which is clockspring. Other codes are: 46 and 47 connector under seat, 3 power supply etc.

Wank your cars gearknob. the flashing light means its ****.