electic window on mazda mx5 sticks when going down(not up). Motors and cables are working. Window appears to move in guides and doesnt go down squarely making it stick. I have tried lubricating the guides with silicon grease. With some manual pressure the window will go down.
Look really good,for another window guide that is missing,or you may need to adjust the guide track,or the window channel,that the window sets in,If the window is moving around in the window channel,then the adhevsive has let go of the window.
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
I will try that and let you know the outcome. Many thanks for your suggestion.
" - mkaye594
How do I remove interior door trim to access electric window mechanism. 2001 Mazda MX5. Window class...
(More)
How do I remove interior door trim to access electric window mechanism. 2001 Mazda MX5. Window class is sticking [motor is OK]
I am having problems with my 2002 Mazda Miata It shows engine hesitation surges around 2500-3500...
(More)
I am having problems with my 2002 Mazda Miata It shows engine hesitation surges around 2500-3500 rpm. Dring that time the engine has lack of power
The problem is the wiring harnass that the bulb clips/connects to. After weeks of researching the...
(More)
The problem is the wiring harnass that the bulb clips/connects to. After weeks of researching the issue I found that this seems to be a problem that other miata owners have experienced. Miata will not simply splice in a new connector, they will only replace the whole wiring system. I was quoted $2.808.00, the parts guy suggested I purchase a wiring harnass and splice it together. I found selections online ranging from $5.00 to $25.00 a pair. Much cheaper fix.
2002 mazda miata. Low beam on right side will not work. I have checked the bulb and fuses, including...
(More)
2002 mazda miata. Low beam on right side will not work. I have checked the bulb and fuses, including under the hood. Could the connector the bulb fits into need to be replaced? How can I tell if this is the problem and what would the approx. repair cost?