Expert
(800) 262-0795
Find awesome deals on a superior quality Discount...
Answer
heater fan for Chevy 1988 S-10 has gone out. I turned off fan shut off engine. When i came back to...
(More)
Problem for Chevrolet 1988 S-10
Wheel bearings on 1988 chevy S-10
Solution #1
posted on Oct 27, 2009
remove grease cap,brake caliper, then remove nut holding rotor now remove rotor, remove grease seal now both bearings should be out ,if replacing races then punch them out and tap new ones in, repack new bearings with grease install rear one and install new grease seal, slide rotor on slide frt bearing on, install washer and nut, tight a little to nearest cotterpin hole,put cotterpin in and put caliper on, hope this helps,good luck.
Yes
No
Popular Solutions for 1988 Chevrolet S-10
Questions and Unsolved Problems for 1988 Chevrolet S-10
Do you recommend Chevrolet 1988 S-10?
Answer
Answer
the fuse just keeps blowing and the truck just dies. I dont know what the problem is. sometimes it...
(More)
Answer
Have fuel to injectors but injectors will not spray. It has 11.9 voltage going to injectors. The...
(More)
Answer
1988 2.5 intermitant runnibilty problem, acts like its running out of fuel but fuel pressure does...
(More)
Answer
1988 s 10 2.5 I start the engine in the morning or after 3 to 4 hours of sitting. It idles fine and...
(More)
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For 1988 Chevrolet S-10:
Related Products & Issues:
Top Car Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Car Repair
Best Chevrolets
Recommended by Owners
Recommended by Owners
