depending on how bad the injectors are you can put some Lucas fuel treatment in your gas tank and it will clean them up for you. I use it every other fill up and have had no problems. My avalanche has 88,000 miles and I have never had injector problems. The power steering flush and brake flush you will need a vacuum pump.
Brakes: Locate the bleeder valve on each caliper and hook up your vacuum pump to it and pump it 4-5 times. Make sure your fluid reservoir is full. Put clean fluid in reservoir as needed. Repeat this again. ON bake brakes you will want to give it a few more pumps than the front because they are farther away from the master cylinder. You will need 2 of the small bottles of brake fluid or 1 large bottle. Sorry, I dont remember the oz. on each size.
Power steering: place a hose into the reservoir and pump all fluid out. Turn wheels all the way both ways and repeat twice. You will need several courts of power steering fluid.
Hello I have a 2004 Ford Expedition, and my passenger seat heater/cooler is not working. when you...
(More)
Hello I have a 2004 Ford Expedition, and my passenger seat heater/cooler is not working. when you select the on button the light comes on for 5sec and then shuts off again, any ideas?
seat heaters will not operate.checked fuse and its ok. when i push switch to turn on heaters its...
(More)
seat heaters will not operate.checked fuse and its ok. when i push switch to turn on heaters its flights up but goes right back off
2005 chevey avalanche transaaction control is not working right. On dry pavement, the truck makes...
(More)
2005 chevey avalanche transaaction control is not working right. On dry pavement, the truck makes noise, will not move and my dash reads "transaction active" what is the fix. Dealer is clueless!!!
my 1500 chevy tailgate handle is broken and the tailgate is closed shut and won't open. I took the 3...
(More)
my 1500 chevy tailgate handle is broken and the tailgate is closed shut and won't open. I took the 3 star screws from the inside of the tailgate out. Now what is the next step in order to fix the handle