With the truck jacked up running or not the steering is hard to turn. when driving and turning the wheel will stay and not straighten out after the turn. Yes the belt is on the pump, the ball joints are good and free the cv joints are also fine. with the tie rods disconnected the steering is still hard which make's me believe it to be the rack and pinion. what do you think or better yet know..lol..
try loostening the high pressure side of the pwr steering pump at the input to rack (I did not say remove it ) it's sounds like either the pump is shot or it's air bound and can't get fluid into the rack
with the fitting loostened try turning the wheel back and forth see if fluid leaks out or is all Bubbles?
I have an Eddie Bauer and it will not go into 4WD. When I press the switch to go from AWD to 4 WD...
(More)
I have an Eddie Bauer and it will not go into 4WD. When I press the switch to go from AWD to 4 WD nothing happens.
When replacing the drivers side automatic window switch module; Does this item need to be...
(More)
When replacing the drivers side automatic window switch module; Does this item need to be reprogrammed into the vehicle computer. We installed one and it does not work...
tried changing headlight bulb. I could not get the spring loose to get old bulb out. Now the dash...
(More)
tried changing headlight bulb. I could not get the spring loose to get old bulb out. Now the dash lights and running tail lights do not work. I checked all fuses and they are ok. I don't know where to look for the problem. Also Is there a diagram that shows how to remove the whole headlight assembly? Thank you for any help you can give me