The plugs can be accessed by removing the front wheels and lifting up the flexible rubber splash shields on inner fender. All plugs are easily accessible with the exception of the #3 plug ( driver's side , center). Unfortunately the steering shaft is located right directly in front of this plug. Some people disconnect the steering shaft and move it aside to reach the plug but I have been able to remove the spark plug by placing the spark plug socket over the plug and then using an open end wrench or ratcheting box wrench over the hex of the spark plug socket.
Guaranteed, this # 3 plug will take as much time as the other 5 plugs combined. Good luck!
have 98 s10 blazer 4.3. when trying to start in morning cranks good wont start can put jumper cables...
(More)
have 98 s10 blazer 4.3. when trying to start in morning cranks good wont start can put jumper cables on and it will take right off battery not dead or weak. after get started it will start rest day ok
ok i have a 98 blazer v6 4.3l 4x4 and my 4 wd wont work the lites on the push button turn on you can...
(More)
ok i have a 98 blazer v6 4.3l 4x4 and my 4 wd wont work the lites on the push button turn on you can feal it kick into 4H and 4L but the it wont kick in when i first bought it i had the the transfer case replaced and some vacuum switch on top of the transfer case replaced it worked the last time i used it was last july.. if any one might be able to help me out and have an idea of what it might be plz let me know