The rotors on most vehicles are removed by (1) removing the wheel, (2) remove the silver colored cap in the center of the hub, (3) remove the cotter pin that goes through the axle nut and axle, (4) remove the axle nut, (5) remove the disc brake caliper (6) now pull on the rotor. It should slide off the axle. Reassemble in reverse order, being sure that the axle bearings are in place with proper amount of grease.
pushed clutch in and petal stayed on floor. vehicle is still in gear. clutch is realatively new and...
(More)
pushed clutch in and petal stayed on floor. vehicle is still in gear. clutch is realatively new and didn't have any problems untill i pushed it in to shift.
i have a 92 bronco and iam putting different doors on it that have power windows locks and...
(More)
i have a 92 bronco and iam putting different doors on it that have power windows locks and mirrors.can u help me with the wiring
I get axle lube on the passenger front wheel mag.It takes some timeafter cleaning the wheel 3-400...
(More)
I get axle lube on the passenger front wheel mag.It takes some timeafter cleaning the wheel 3-400 miles.