Raise vehicle and remove the tire. Then have someone else pump on brakes until they are hard, then press and hold brake pedal in. (do not let off) then you can open bleeder valve and let air and some fluid out. Do on each side. (both front or both back) Pump and hold brake pedal, open bleeder valve until pedal goes to floor, then re-tighten, then let off brake pedal. Do this about 2-3 times on each side. Do not let brake fluid level go down to low when bleeding or you can have alot more air in the system. Or if you have no one else to help you, you can get a bleeder pump and **** out air until you have full stream of fluid.
could anyone assist me with the destributor wirnig colour codes for both the ga16dne and sr20det...
(More)
could anyone assist me with the destributor wirnig colour codes for both the ga16dne and sr20det nissan motors?