I have a 1991 nissan 240sx hb with a ka24de engine. just replaced the head gasket and when wired up and tried to fire the coil didnt spark. I tested the cables and the coil, and everything is in spec. Why is there no spark?
hi, i did a head on a nissan and had similar problems , what i had missed was one ground wire that i tucked neatly out of the way by the firewall, must have been a very important ground .. hope this is your fix
ive put a twin cam 94 into my 92 that was a single cam, everything works except i have no spark to...
(More)
ive put a twin cam 94 into my 92 that was a single cam, everything works except i have no spark to or from my coil. ive put a 94 wiring harness wat im wondering is should i or do i have to stay with a 92 wiring harness
I have a rough idle. How do i fix it? And any other good tips you know about these 1992 240sx would...
(More)
I have a rough idle. How do i fix it? And any other good tips you know about these 1992 240sx would be greatly appreciated. Thank you very much!!! Branden
Hi, i have a nissan bluebird 1992 ARX model. I tried starting it and its as dead as a door nail....
(More)
Hi, i have a nissan bluebird 1992 ARX model. I tried starting it and its as dead as a door nail. When i turn the ignition on various lights appear. When i turn the key all the way as if to start it, a little red lighted box appears,It looks like this
\\\\
=[ ]=
Thats as close as i can get it without drawing it. I have a users guide but its all in Japanise. I would like to know what this symbol means , so that i can sort it out if i can.
That would be a great help
Thank you
Brad