At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is only one fuse that mentions 'Locking', but also refers to the General Electrical Module (GEM). If you change the fob battery, you need to reprogram it to the vehicle. Or you could open any Transit around you. Lots of help below including resetting..
unlock the car with the key/hold over for 30 secs.
lock the car with the key/hold over 30 secs.
then press/hold down unlock button on remote.
you have just reset your alarm/central locking system
change remote batteries every 2 years...... both remotes....
unlock car with key/hold over for 30 secs then lock car with key/hold over for 30 secs then unlock with remote hold button down for 30 secs.this should reset system.
reset the fob,,,turn key on,leave it for 10 minutes,then turn it off,and right back on,,do this two more times,a total of thirty minutes,this should reset the fob.
try putting the key in the ignition and turning it to on then holding the unlock button for 30 seconds and then remove the key and try the remote if still no good go to your dealer and get them to reinishalise the system
2000 Mazda 626
Note:Make SURE the battery is new. Instructions for programming ONE keyless remote fob. 1.Open the driver’s door & leave open. 2.Insert the key in the ignition. 3.Turn the key to the on and off position 3 times. 4.Remove the key from the ignition. 5.After door open chime stops, press the door open button 3 times. 6.After chime, press any fob key twice. 7.After second chime, press any fob key twice again. 8.After third chime, press any fob key twice again. 9.Press the door open button once. 10.The car should give another acknowledgement chime. 11.Test key fob. This DOES work. I just programmed mine successfully today, three hours ago.
×