Blinking lights and wont accept a cd - 2000 Chrysler 300M

If its a 6 disk cd system the cd tray is wedge causing the cd option to not work. Most of the time one of the cd slipped out of its position causing it to wedge

pull the player out but leave it connected. when you push the eject button,lightly tap on the top of the cd player, if there is one jammed, you may want to consider just getting a new cd player, it may do the same to your cd!

In this situation you should realy take it to a reputable auto electric shop. Good luck

maybe some kind of alarm or a blinking light to make people THINK it has an alarm???

Two fuses; #4 & 19. #19 is the changer & #4 is the radio.

Try disconecting the battery that should do the trick if not the radio could be shot out.

Had same problem wit my 4 disk. A CD was jammed. Remove and open the unit up and remove the CD. The mechinizem might be jammed also. Try this before replacing. Seems like a common issue with these units. The newer 300Ms came with 6 disk changers.. not sure if these will work with the existing radio.

Good luck!

SOUNDS LIKE THE EJECT BUTTON IS STUCK ON, TRY TAPPING ON THE EJECT BUTTON OR RECHECK THE WIRING TO MAKE SURE THAT YOU HAVE ALL THE WIRES IN THE CORRECT SPOTS. ALSO CHECK TO SEE THAT THE GROUND WIRE ON THE BACK IS CONNECTED AS WELL. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

Hi, my cd changner wont to accept cd, and wont start playing.So i would like you to help me