I need to know the torque settings on the head for a 94 jeep grand cherokee laredo

4 liter 6 Cyl. engine: you have 14 bolts. start counting the bolts in the middle of the right (passenger) site with number 1, 2 is the middle of left side, #3 is next forward, left side, #4 forward right side, #5 backward right side, #6 backward left side, #7 two steps forward left side, #8 two steps forward right side, #9 two step backward right side, #10 two steps backward left side, #11 front left side, #12 front right side, #13 back right side, #14 back left side.
Tighten the bolt in three steps.
Step A: 22 ft-lbs Step B: 45 ft-lbs Step C: bolt #11: 100 ft-lbs, all other 110 ft-lbs
If you have a V8 engine, please come back again!

Assuming the motor is an inline six
1.Middle bolt is number 1.Clockwise torque to 22 f/lb
2.Same pattern to 45 f/lb
3. same pattern to 100 f/lb
Be sure to use loctite 592 to the threads and some head gasket sealer to both sides of the head gasket.
Hope this helps