At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
gear, is this a Manual trans? or AUTO you said gear.
what gear, please name the gear, 1,2,3,4,5 R
or PRNDL ( a/t box auto matic) what shift lever selection?
what is out door air temp, you do know brakes can get wet and freeze right?
it wont go you meant? until brakes are touched, key word won't?
ok engine only starts in PRNDL set to N??
is that it?
and then when you shift to D, the car will not move
what about the other gears.? try them all yet?
my guess (wild) is that you dont know how park lock out works.?
that you must hold the brake pedal down to shift to park or neutral.
is that it? (read operators guide?)
my guess is car is not drive-able. key point1 (a dead car)
point 2, engine starts and runs. and races on demand with gas foot.
point 3, im lost. (no trans stated or clear symptoms.)
my jeep has 6speed manual box
and the clutch allows me to start car.
on Automatics trans must be in park or neutral to crank engine.
"it will go till i touch brakes"
I read that 10 times,
my 2nd guess. the engine stalls ?
IS THAT IT, stalls means engine RPM is 0
and right foot actions are dead.
and all dash lamps glow, telling you STALL is now.
If your car wont go into gear when the engine is NOT started then you have a gearbox problem not clutch.you should still be able to get all gears without using the clutch pedal.The clutch is only there to stop you stalling when standing still,Its possible (but not nice)to drive and change gear without a clutch.Hope this helps.
If the throttle cable is not attached properly to the throttle body or you have a bad motor mount, the throttle cable may be pulling the throttle open as you shift into gear. Open the hood, find the throttle cable on the throttle body. Inspect how it is connected and also how the cable is fastened in the engine comoartnent. Next, watch what happens as someone else starts the truck and puts it into gear. If the engine shifts significantly, check for broken motor mounts. If the throttle cable is misbehaving, correct the installation.
You have internal transmission damage I expect the clutches on third and fourth gear are wiped out. Its either that or a solenoid gone bad that holds those clutches pressure get it in a transmission shop soon to avoid whole transmission replacement costs.
Is there any check engine lights on?The idel air control has most likely quit,and it quit while it was open.Remove it and see if the valve is stopped up,if not replace it.Be sure to make sure the throttle is not ****,and is all the way down at idel position.I hope this is somewhat helpfull.
×