2008 Subaru B9 Tribeca Logo
Posted on Oct 15, 2009

Trying to change low beam light in subarau tribeca 2008- need to see schematic

  • Anonymous May 11, 2010

    This shouldn't be that difficult. I've changed out both sides of our 05 Legacy 2.5i......Have you already looked through engine bay behind the light?

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 22 Answers
  • Posted on Oct 18, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Oct 17, 2009
Answers
22
Questions
1
Helped
12127
Points
28

Hello SUBY bro, kick me if I'm wrong but imho this should not be that complicated to require a schematic......Below is the reply I posted here on FixYa for another 08 Tribeca owner......Peace

We have an 05 Legacy and I've done this. Tribeca should be the same way: Look through the engine baytrying to change low beam light in subarau tribeca - 2.gif behind the light, you can locate the position by following the wires which actually connect to the bulb assembly. The bulb assembly ought to be removable with a 1/4-1/2 turn and pull motion. Be sure to not touch the replacement bulb with your bare hands. Your Subaru service ought to help you with this and not charge you......

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The low beam on my 2009 Tribeca is not very bright and does not extend out very far. Is this a problem with all Tribecas?

Check the aim of the low beam. Pull up close to a wall, bumper against the wall and mark with chalk the main beam position on the wall. Now back away, the the main beam goes down, the aim is off and an adjustment is needed to raise the main beam to about the same position. At about 25 feet from the wall, the main beam should be about 2 inches lower than your first mark.
0helpful
1answer

I need to replace the drivers side low beam on my 2008 subaru tribeca

The High and low beams are all in the same bulb. You have to reach in behind the light in the engine compartment and undo the retaining collar and pull it out and then pull the bulb assembly out if it separates from the collar. Unplug the bulb and replace it. I usually stop at Walmart and use the little box they have there to find the proper bulb for the vehicle, in most cases they are the less costly of the places you can get the bulbs.
0helpful
1answer

How do I adjust the low beam headlght on a 2006 Sabaru Tribecca B9

I have a similar problem. The adjustment screw adjusts both the high and lof beams. After changing the passenger side low beam, both sides then pointed at the ground. High beams were fine. I adjusted so the low beams are fine but now the high beams point straight up.

In talking with Subaru Service he said there is a "module". He said after changing the bulbs they should point down then auto-adjust back up. That didn't happen. I haven't found anything on such a module. He said it woul be $109 for adjusting the lights OR for the module.

If I find anything more I'll let you know.
0helpful
2answers

2008 gmc truck Low beams quit working. I have High beams and running lights only. whats possible fix?

Are the bulbs good?

If your low and high beams are on the same bulb, then the low beam elements have blown even though the high beam still works, you need two new bulbs.
0helpful
1answer

Low beams on my Tribeca 2008 burned out frequently (4 times in 5 months). Once both at the same time! Thanks!

replace them again and install with gloves on. Oils in your hands destroys these bulbs prematurely
3helpful
1answer

I have both of my low beam lights out, could you please let me know what the procedure is to replace them?

wait one second, both low beam lights went out at the same time? If so, sounds like something else is wrong, and I'ld suppect the hi/low beam switch. If the car is this new there should be a warranty on it to be replaced.
0helpful
1answer

Subaru tribeca 2006 i cannot turn on headlights there are 3 lights on each side of the car, i can turn on the 2 smaller lights but the main headlight only goes on when i turn on flash. any ideas? i bought...

Sounds like the low beam bulbs are burned out, I have heard of a lot of over seas Tribecas having head and tail light problems. I would definitely check those bulbs, that will the cheapest start.
7helpful
1answer

2008 gmc acadia low beam light bulb changing

how do you change the low beam light bulb on the 2008 gmc acadia
1helpful
3answers

Fuse diagram for 91 chevy corsica

Need copy of wiring schematic for 1991 chevy corsica
Not finding what you are looking for?

1,224 views

Ask a Question

Usually answered in minutes!

Top Subaru Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...