How do I replace the struts and shocks

well the rear are easy take the wheel off,,,put a jack under the rear axle on the side you are doing and put tension on the jack to jack it up alittle,remove the 21mm lower shock bolt and the 18mm top shock bolt and release the jack,then remove shock and reinstall new,,,they are easy do the same fo rthe other side and then go to the front,,,take off wheel,,, no jacking up required for front struts,,,remove the two 18mm nuts and bolts that connect the strut to hub and then 18mm nut the holds the sway bar end link to strut,,may may need a vise grip on the back side of the end link to hold it from spinning as they rust fast,then open the hood and hold the strut with one hand thru the wheel well and take the top strut mount nut off under the hood 18mm,watch because the strut will fall in the wheel well so hold it,i would advise using a air gun to do this all other wise youre gonna have a hard time to remove the sway bar end link nuts