Civic bonet latch cable broken How can you unlock your Bonet?

by using a long lever and looking up from underneath see if you can push the latch to release the bonnet. To make the job easier you may need some one to push down on the bonnet at the same time to release the load on the latch

generally, cable will not break.It might be cable endlock or lever or distrubed cable clamping.see from front under bonnet below the upper panel you will find bannet cable wire going to bannet lock, try n pull it. or pull the locking lever. it will definitely open

should be a cable attached to it push it back into the dash and try closing it

see if you can get someone to push down on the bonet above the latch as you pull the hood release like bounce the bonet slightly and try to pull it up at the same time if this works lube the **** out of ti before you close it again.

The cable may be stretched.

i believe the cable snapped. check to determine if the cable is attatched to the handle. if the cable has snapped there , use pliers to pull the cable. if its broken further up the line, you'll have to get under the front and try to release the latch. you may also be able to access the latch from the grill

open the bonet, unlock the headlight cover latch remole the existing bulb thd replace with appropreate one.

new hood primed and painted will probably run you $300 or so... you can probably find a much cheaper one at a junk yard

you can still use key to unlock door to open bonet but dont leave keys in car when connecting new batery. hope this helps?

you need to pull the C3 fuse and insert a wire and then put the fuse back in.
connect the neg ground to the metal steering column and the positive to the wire. close the car door and turn the door key on and off three times. open the door and now the hood latch will work.