At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No, they will not. The engine wiring harness will be different if for no other reason than the V10. Also, the wheelbase of the quad cab is 14 inches longer the regular cab. Have you taken that into consideration?
The amp remote is actually run by the computer bus line. This is a twisted pair of wires that allow computers to talk back and forth.. therefore it does not have a remote wire. Best bet is to run amp on a switch or a keyed power wire for remote turn on. Also if u plan on changing stereo u will need to buy a interface kit or truck may not even run
One wire provides power for both high- and low-beams from the light switch to the multifunction switch (on the steering column), and it is a light green wire. From the multifunction switch to the low beam lamps is a violet wire with white tracer, and to the high beams is a red wire with an orange tracer.
i had same problem in my truck. the a/c wire in column is a thicker red wire, hooked into like a black relay box. either that relay box is bad or because of using the tilt, the wire cracked and needs to be re-spliced. that was my problem and it fixed it
remove steering column covers and check connections at ignition switch..had a truck recently at dealership with similar problem and connector at back of ignition switch was melted..wires were for blower motor and battery feed to switch..had to replace switch and connector/pigtail
×