how do i bipass or wire around the security system in my 2002 impala i replaced the key and tumbler and ignition switch it will not crank if i put a screwdriver to the starter it will start and die like the fuel pump is not running i tried the key relearn process and it did not work please help
one of the solutions that i used is i took it to an alarm place and had an alarm put on it wiht a bypass or you can have a bypass put on and that will solve it i had that done over 1 year ago and haven't had any problems yet.
Hey guys I have had the same problem for about a year and I have tried changing starters ,key cylinders batteries I have done the wait 1o min key in the on position thing and it worked for a bit but wasn’t 100%
I was sick of the dealerships dicking me around and mechanics…. So I did some research my self and found a Permanent fix for this Security problem, I haven’t had this problem happen since no more unreliable car :D:D
If you need help please email me at jonotucker@hotmail.com
my heater fan keeps cutting out. when it cuts out, the light is on for the circulate inside air,...
(More)
my heater fan keeps cutting out. when it cuts out, the light is on for the circulate inside air, when it begins working again it switches to the outside air. when it is not working, the cruise control light comes on when i play with the fan control. ????? also the check engine light has come on since this problem started.
My radio will not turn on, it shows the display time that i last turned it off, and is showing...
(More)
My radio will not turn on, it shows the display time that i last turned it off, and is showing message TRAF
temp gage doesn't work and fans start as soon as i turn on the ignition. however remove the battery...
(More)
temp gage doesn't work and fans start as soon as i turn on the ignition. however remove the battery cable for 5 mins and replace again and it works fine. I can use it around town and it works perfectly, but take it on the highway at above 100 k for about 1/2 an hour and it gives out again and will not work until i remove the battery cable and wait about 5 min for the comp to reset.