Location of oil pressure sensor switch on a 2001 Mitsubishi spyder gt V6. Also, what causes a P120 code with service engine light.
SOURCE: clutch removal
You have to insert a screwdriver through a hole in the bottom of the transmission. while pushing the fork away from the engine you push the retainer clip with the screwdriver blade. it should release the bearing and cause the cluch fork to move freely toward the engine. It may take you a few tries to do this. This is whats known as an reverse pressure plate assembly. I think its kinda stupid idea. If only the designers would look at what it takes to work on these things......
SOURCE: mitsubishi eclipse convertiable timing belt change?
Typical timing belt intervals are every 60k miles. It's a very involved service to do the whole job - timing belt, timing belt tensioner, serpentine or accessory belts, water pump, thermostat, spark plugs, all fluids, all filters, brake and suspension inspection, and tire rotation. On many cars it's recommended to change the oxygen sensors as well. Quite a bit of this can be done when you want, but the first five items are critical and should all be done. And regardless of whether your manufacturer says the coolant is "lifetime", replace it - don't reuse coolant. It's cheap and it's good practice to use new coolant.
SOURCE: need 4 digit radio code for 2001 mitsubishi eclipse
try to call the mitsubishi dealer coz every radio has different code thats the only way you can get those code.
SOURCE: location of 02 sensor bank 1 sensor 1 on 3 ltr engine
it's right adjacent to the cataytic converter
SOURCE: location 02 sensor Bank1 sensor2 on 2001
in the exhaust , behind the catalytic converter.
autodoc
on the buttom of oil pan take 1 bolt out and 1 wire off it
374 views
Usually answered in minutes!
×