For dashboard mount:
Disconnect the negative battery cable.
Carefully pull the clock bezel from the dash.
Remove the screws securing the clock to the dash.
Pull the clock out slightly and unplug the electrical connector.
Installation is reverse of removal.
For console mount:
Disconnect the negative battery cable.
Remove the rear console.
Remove the screws securing the front console cover and pull the assembly out slightly.
Unplug the electrical connectors on the back of the panel.
Remove the screws securing the clock (they come in from the back of the panel), then remove it from the panel.
Installation is reverse of removal.
Hope this helps you.
506 views
Usually answered in minutes!
×