2003–06 1zz-FE Engine & 2003 2zz-FE Engine
Use a wrench and rotate the belt tensioner clockwise—2003–06 1ZZ-FE engine and 2003 2ZZ-FE engine
To install:
Use a wrench and rotate the belt tensioner clockwise.
This is by far the best set of directions and illustrations on the entire web, BIG THANKS!
The illustration was very helpful ,but disconnecting the batt cable .?
This was great keep them coming, took me 10 mins to replace.
×
SOURCE: need a diagram for serpentine belt
Click this link, then look at illustration 6-6.
Regards
Brian
SOURCE: 2005 toyota matrix routing for serpentine belt
Start with it around the crankshaft, and then just go flat sides to flat sides, and ribs to ribs, and work your way around.
SOURCE: serpentine belt
Hi there weekie,
Simple and easy. Really.
Mike
SOURCE: replacing the serpentine belt on a 2003 toyota
The arm on the tensioner (the roller which presses against the belt to give it tension) should have a hole in it for a 1/2" drive on the end of a ratchet or breaker bar.
Inserting the ratchet or breaker bar in this hole will allow you to move the arm, releasing the tension on the belt.
Charlie
SOURCE: how to change serpentine belt on 05 toyota matrix
There's a belt tensioner by the alternator, use a breaker bar to turn it a little to put slack in the belt to take it off. Then follow the belt routing diagram under the hood.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
12,414 views
Usually answered in minutes!
×