Question about 1999 Plymouth Grand Voyager

1 Answer

My side mirror is cracked I have the replacement but don't know how to put it in

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 484 Answers

On the interior side of the mirror, there will be a plastic panel or cover. Remove this panel CAREFULLY (they are often easily broken - and expensive to replace) and you will find the fasteners that hold the mirror on. Remove them, then the mirror and then install the new one in the same fashion reversed.

Hope this helps,
matt

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 chevy tahoe mirror replac


what mirror working on out side or inside.if you talking about out side mirror need to remove upper corner interior trim panel by pulling it straight off until clips release it from the door.

May 04, 2013 | Cars & Trucks

1 Answer

Need to replace the driver's side glass mirror with turn signals


Those are usually sold as a one piece unit. I normally don't replace just the glass. Open the door panel up and you should see the wiring and 2 to 3 nuts holding the studs for that housing din place. remove those and remove the housing. As far as opening the housing I don't even think you can.

Nov 22, 2011 | Cars & Trucks

1 Answer

How do I replace driver side view mirror


There is a triangular piece of plastic inside the door opposite the mirror. You remove the panel and you'll see 2 bolts. Remove the bolts and unplug the wire connector (if you have electric rear view mirrors) and the mirror will come right off. Installation is reverse.

Apr 07, 2010 | 2006 Chrysler PT Cruiser

1 Answer

2003 subaru outback mirror glass replacement


You need some bathtub silicone sealer and some black electrical tape and a couple of small wooden blocks. Carefully break out the cracked mirror. WEAR gloves and glasses when you do this and have a bucket to catch the falling glass. Make sure the mirror back is clean and put a bead of silicone around the back of the new mirror. Keep it about 1/4 inch from the edge and some dabs in the center portion. Place the mirror on the back and tape one edge down using a wooden block for a spacer. Then do the other side. Make the tape snug so it squashes the silicone and leave the mirror alone for 24 hours. After that take the tape and blocks off and you are good to go. Hope this helps.

Jan 07, 2010 | 2002 Subaru Outback

1 Answer

Changing Door Mirror Glass XJ6(X300)


Hi

You need to put on a pair of gloves, and safety glasses. (Safety First !)
Prise off the broken mirror from the plastic base that it is stuck too.
Give the plastic a clean with nail polish remover or similar.
Peel off the backing on new mirror glass, and carefully stick it on.

Good Luck !

Don´t forget to FixYa Rate Me Please !

John.

Feb 05, 2009 | 1998 Jaguar XK8

1 Answer

Replacing a cracked side-view mirror


well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much

Jan 31, 2009 | 2005 Nissan Murano

1 Answer

Need to replace passenger side view mirror 200 GMC Jimmy Diamond


On my '97, there was a triangular shaped piece of plastic on the inside trim that had to be removed. I think all three mounting screws were under that. It's been a few years, but I think that was how it was done.
I remember it was pretty easy though.

Jan 29, 2009 | 2000 GMC Jimmy

1 Answer

2007 Hyundai Accent Hatchback cracked side mirror glass


hi from uk answer is yes the mirror glass can be bought on its own at least here in the uk HALFORDS do a selection of these for various models also a mirror glass that simply sticks to the cracked glass full surface by a backing of double sided glued cushion pad so assume your location will have these at motor supermart ? if not then you can do as i have done in past ? make a card template of mirror then cut or have cut ? your own mirror then double sided tape will do the same job?

Dec 11, 2008 | 2007 Hyundai Accent GS Hatchback

1 Answer

Driver side mirror


Remove plastic cover on inside of 1/4 light and unbolt-remove elect connections
John

Jul 04, 2008 | 2005 Jaguar XK8

Not finding what you are looking for?
1999 Plymouth Grand Voyager Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...