Question about 1994 Jeep Wrangler

1 Answer

My jeep wrangler 1994 manual brake light stays on after a release the handle.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 206 Answers

That light usually has two functions: (1) Parking brake is set and (2) hydraulic brakes system failure. I would assume that you have had a failure in the regular brake system, and trouble shoot that. Check fluid level, then make sure all 4 wheels are applying the brakes. Most systems have a split, so you could get a failure of say the front brakes and still have rear, or vice versa, so you might not realize at first that you have a failure, just a longer stopping distance.

Other option is a failure (short) of the switch or wiring harness that is activated by the setting of the parking brake.

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail light stays on even after releasing brake handle. What could it be?


Check the contacts for the Emergency Brake Handle, you will need to pull out the back half of the center console to access it.

Jan 27, 2014 | Jeep Wrangler Cars & Trucks

1 Answer

I need a diagram to put a wiring harness from a 1994 4.0 jeep wrangler in a 1993 4.0 jeep wrangler


check chiltons manuals, they usually have wiring diagrams in the back of them to show you all you need. its hard to find online ones. you always have to pay for those ones

Mar 21, 2012 | 1994 Jeep Wrangler

1 Answer

Manual transmission stuck in neutral


two things to start with is the brake light switch? Do the brake light come on when pedal is pushed? No Replace brake light switch. Yes the replace netrual safety switch. Thats a start good luck.

Nov 03, 2010 | 1994 Jeep Wrangler

1 Answer

1994 jeep wrangler needs headlights working and it is not the fu


i have a 1989 wrangler. for no resan i know of the head light tail lights and interior lights stoppede working? anoone know why?

Jul 24, 2010 | 1994 Jeep Wrangler

2 Answers

1997 Jeep wrangler rear emergency brake cable replaced and now brake light stays on


possible cable out of adjustment to loose.try forcing brake aplicator towards full off and see if it goes off. if so adjust switch or cable

Jun 26, 2010 | 1997 Jeep Wrangler

1 Answer

During very cold mornings, left signal light stops blinking when I step on the brake.signal light stays on until I release the brake.


You have a bad ground connection at the bulb socket on the left rear. Remove the lens assenbly and inspect the connections for corrosion or loose connection.

Feb 09, 2010 | 1999 Jeep Wrangler

1 Answer

Parkling Brake Console Light Stays On


Parking Brake Console Light Stays On The light is on because the brake fluid is low. The sensor in the brake fluid reservoir is signaling low fluid. This may be because leaking or the brake pads/shoes are worn down, so check to see if they needs replacement. In the mean time you can add brake fluid.

The Parking brake switch is activated by the brake handle. If you use a flashlight you may be able to see it next to the handle.

May 31, 2009 | 2000 Jeep Grand Cherokee

2 Answers

I hit the brakes and the radio cuts out


i would say you need to replace the flasher fuse for the turn signals.is you radio aftermarket

May 22, 2009 | 1994 Jeep Wrangler

Not finding what you are looking for?
1994 Jeep Wrangler Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...