Question about 1992 Mercury Grand Marquis

3 Answers

Turn signal wont blink - 1992 Mercury Grand Marquis

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

If bulbs light and do not blink the flasher is the problem. If they do not come on, check your fuses. If the fuses are good the switch is the problem.

Posted on Oct 08, 2009

Testimonial: "thanks very helpful"

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do you have to remove radiator to change water pump on a nissan cab star

Posted on Oct 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 2,984 Answers

You need to replace the flasher....the fuse may be bad also.

turn signal wont blink - 599ad7d.jpg
Looks like this:
83928f9.jpg

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers wont blink change the relay fuses ok


What about the turn signal switch on the steering column? Did you use a testlight and check voltage at the turn signal fuse? Goes hot when you turn on the key.

A lot of times, it's the turn switch or wiring in the steering column, but, It don't hurt to check the basics.

Feb 20, 2015 | 1999 Oldsmobile 88

1 Answer

Turn signal and Hazzards issue


Turn signal flasher. Replace with a heavy duty one.

Mar 20, 2014 | 2001 Jeep Cherokee

1 Answer

My turn singnals wont blink but hazards work fine


That's a turn signal flasher. They are usually round and mounted on or near the fuse panel.

Sep 29, 2012 | 1996 Chevrolet Blazer

2 Answers

They wont blink every thing else works turn signals wont blink when turn on


Most likely a bulb out. Try putting on a turn signal and get out to see if the lights are on. If there is one out it needs to be replaced. There is a possibility that it is the turn signal relay as well. This should be easily found using the owners manual for replacement.

Mar 03, 2011 | GMC Jimmy Cars & Trucks

1 Answer

My turn signal wont blink and have replace all


You will need to replace the flasher relay, it is what makes the bulbs flash.

Jun 04, 2010 | 1993 Buick LeSabre

1 Answer

TURN SIGNAL ON MY 1994 PONTIAC BONNEVILLE WONT BLINK


the turn signal flasher is located under the dash, driver side, on steering column

May 20, 2009 | 1994 Pontiac Bonneville

3 Answers

Turn signal wont flash is not blinking


If you mean autozone sold you a socket looking thing, that's possibly a relay? That doesn't go in the fuse panel area. If you have your manual there should be a diagram of the relays. I don't have the same vehicle, but the relays are just above and to the left of my brake pedal. I could be wrong and what you have is not a relay, but not blinking could be a blinker relay problem.

May 20, 2009 | 1994 Pontiac Bonneville

1 Answer

TURN SIGNAL LIGT WONT BLINK ,JUST STAYS ON


dont replace the switch make sure you have the correct bulb installed correctly first. might save you another headache i take it the other blinkers work than you have a good relay good luck

Apr 14, 2009 | 1998 Volvo V70

1 Answer

Turning signal


I don't know if it applies to the '92 Roadmaster or not, but I do know that some vehicles will do that if a bulb is burned out. I had a car that did the same thing, where one direction would not blink, but the other would, and the hazard lights worked fine. Replacing a bulb fixed the problem.

Jul 08, 2008 | 1992 Buick Roadmaster

Not finding what you are looking for?
1992 Mercury Grand Marquis Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...