Question about 1994 Acura Integra

1 Answer

Any trick to getting the oil fliter off? Is there

Any trick to getting the oil fliter off? Is there a special wrench? Just bought 94 Acura Integra

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

The best tool i have ever used are Jaw Pliers. About $10 form your local hardware store.

They get a really good grip and can get any oil filter i have tried off.

If you are having heaps of trouble shifting it even with the jaw pliers you may need to break the seal of the filter to remove it.

The best way to do this is to get a screw driver and a hammer and punch a hole into the oil filter while it is attached (make sure you do it away from the base and close to the edge so that you don't damage the actual pipe coming out of the engine)

Also be careful when you do this as oil is most likely going to come out of the hole and all over you.

Once the hole is in and the oil drained stick the jaw pliers back ona nd you will be able to get it off straight away.

Good luck

Posted on Feb 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble code 27


you did this on a 94 integra
http://www.troublecodes.net/acura/

and got one of these. 27 is not on list. count it wrong?
http://www.troublecodes.net/acura/86-94acurabasic/

Dec 30, 2013 | 1994 Acura Integra

1 Answer

Radio code for acura integra LS 94 I just got the car


Take your VIN# to local Acura dealer and they can provide you with the code. It's a theft deterrent option and only dealer has access to codes. If you have owners manual, prior owner moth have documented it. If not, get code from dealer and write it down (like in glove box) with a Sharpie.

Feb 23, 2011 | 1994 Acura Integra

1 Answer

Bought use car and changed oil and cant seemed to


It's a little button above your right knee. Try turning the ignition on (without starting it)... then press the button for about 5 secs... then start it. Should be out then.

May 06, 2010 | 1994 Acura Integra

1 Answer

I dont know where to plug in the wires from the


Get a HAYNES MANUAL for your car /auto zone ,napa

May 02, 2010 | 1994 Acura Integra

1 Answer

I have a 94honda civic witha b18a1 and


well a b18a is from a 90 to 93 integra, b18b is from 94-01 integra and lsd may be stamped on case, or if u remove the half shafts there will be and open hole tru the differential

Mar 02, 2010 | Acura Integra Cars & Trucks

1 Answer

Can i put a 1994 acura integra ls trans to replace a 1989 acura i


I don't think this would be possible wihtout some hassles.

The engine type build changed twice between the 89 and the 94 series integra.

I would suggest you speak to Honda specialised mechanic before you purchase the 94 tranny.

Also check out the Honda forums as they ahve guys who have done some handy things with the ol integra

Feb 09, 2010 | 1989 Acura Integra

1 Answer

I have a 94 acura integra ls & now air is coming out of the vents


Check all of the fuses related to the air conditioning. That is where I would start. Normally the AC has its own set of fuses and relays.

Feb 05, 2010 | 1994 Acura Integra

1 Answer

Oil light comes on after oil change 1992 acura integra.


If the oil lamp itself is illuminating it is not a maintenance light that can be reset the oil pressure sending unit is detecring low oil pressure. You should have the vehicle serviced right away. The reset procedure for the maintenance indicator is as follows,with the key off depress & hold the odometer/trip button on the instrument panel turn key to run position wait 10 seconds for reset

Apr 17, 2009 | 1992 Acura Integra Hatchback

1 Answer

Special bolt on the crankshaft pully on 1990 acura integra


It should be a hex bead bolt. Nothing really special about the. If its a bolt that is torqued then tightened to a specific angle then you need to replace it when doing the work.

Dec 30, 2008 | 1990 Acura Integra Hatchback

Not finding what you are looking for?
1994 Acura Integra Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...