Question about 2006 Chevrolet Trailblazer Ext
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: change headlight
Behind the low beam and high beam lamps, on the back of the assembly, you can see and feel a round, cup-like, hard plastic piece. This is really just a rubber cap covering a plastic cylindrical housing, and is the "back-door" for lamp access. This rubber cap, or lid, can be pulled off with your fingers...if you can grip it just right and pull off. If this is too hard to do, then take a flat tip screwdriver and gently "pry" it off. Once you see how it is attached, your going to do a 180 and say, "gee, this is a pretty easy design" !
The bulbs do not pull out!! They are removed with a 90 degree twist.
If you are going to replace the passenger side low beam remove the air cleaner assembly first. To do this remove the cross brace, then the 3 screws on the air cleaner assembly. This will give you easy access to the bulb assembly. Test the bulb before you reassemble. ADDITIONAL OPTION: On each side of the assembly, you will see a small, thin release bar that will pull up (I needed a small pliers to get one loose). Once both are in the "up" position, the entire assembly can be gently eased out. You won't get far because the other bulbs are still plugged in. However, you don't have to unplug any of the other bulbs or remove the air cleaner. Easing out the assembly simply proves more room for your hand to get a better angle at the bulbs. I simply reached around and removed the old bulbs as specified above and did the reverse to insert the new ones.
Posted on Dec 10, 2008
There are not two rods, there are two clips one under fender weild and one right above the light on top of the cover. Pull up on these two clips and pull the light forward a couple of inches and remove the dust cover. You have to take the air filter cover off to be able to reach in and replace the light. It took me about 10 min to figure these out but hope it helps out.
Posted on Jan 14, 2009
Tips for a great answer:
Apr 07, 2011 | 2006 Chevrolet Trailblazer
Mar 14, 2011 | 2006 Chevrolet Trailblazer
Feb 21, 2011 | 2005 Chevrolet Trailblazer Ext
Jan 12, 2011 | 2002 Chevrolet TrailBlazer
Dec 27, 2010 | 2006 Chevrolet Trailblazer Ext
Dec 13, 2010 | 2006 Chevrolet Trailblazer Ext
Apr 23, 2010 | 2005 Chevrolet TrailBlazer
Jan 03, 2010 | 2006 Chevrolet Trailblazer
Dec 11, 2009 | 2004 Chevrolet TrailBlazer
Oct 30, 2009 | 2006 Chevrolet Trailblazer
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: