Question about 2002 Dodge Durango

1 Answer

Need a diagram of a break down of how to change/replace the front differentials of a 2002 dodge durango

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

Do me a favor and reword what exactly you are requesting. I understand you would like a diagram or breakdown of the front suspension....but I need to know if you have the 4WD model and what part you are needing to fix/replace.

Thanks and waiting for your reply.....

Posted on Oct 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Multiple codes on 2002 dodge durango

This many codes sounds like a wiring issue. You need to inspect all the wiring. If you have rabbits in your area, they eat wires. If not then it is likely to be a corroded or loose ground. You need to get a wiring diagram etc.

Feb 25, 2014 | 2002 Dodge Durango

1 Answer

2002 Dodge Durango SXT 4.7L RWD shaking (serious vibration) badly between 70 to 80 mph

If it were me I would take out the drive shaft and check the play in the universal joints (I know you said they were replaced). Unlike ball joints they should exhibit good freedom of movement and flop from one position to the next as the shaft is rotated in the hand. Check that the bearing cup retaining clips are present on all sides. If there is any tightness in a bearing it is possible that either one of the cups has been pressed (hammered?) in too far or that a needle bearing was dropped from the outer race into the cup during assembly. Also check that the cup holders (arms) are not bent, sometimes if care is not taken to support the back of the 'arms' when installing the bearing cups the 'arms' will bend.

Feb 28, 2017 | 2002 Dodge Durango

1 Answer

I have a 99 durango. it makes a grinding noise in the front end. if i just lay my foot on the brake pedal it stops. I have replaced the wheel bearing on both sides and checked the differential bearin

check to see how much pad is on the break pads also remove the rust around the disk as this some times catches on the pads making a scraping noise hope this helps ivan

Oct 15, 2012 | 1999 Dodge Durango

1 Answer

Can cold temperature break or crack the plastic front bumper on the Dodge Durango?


Feb 14, 2011 | 2002 Dodge Durango

1 Answer

Where does the stop light switch go on a 2002 Dodge Durango go? How do I get to it so I can replace it??

if it is the break light switch that you are looking for it is high up on the break pedal and is connected with a small clip

Dec 30, 2010 | 2002 Dodge Durango

1 Answer

How hard is it to replace the front drive shaft on a 2001 Dodge Durango 4X4?

Not hard at all. If you climb under it and look, you'll see where it mounts to the front differential and to the transfercase. Grab some tools and have at it! Pretty simple job.

Apr 30, 2010 | 2001 Dodge Durango

1 Answer

Im looking for a front differential for my 1999 durango

Bring the VIN number to a dealership and have the parts guy look it up. There might be a tag on the diffy itself saying what it is. I know theres a way on counting the ring gear teeth and the pinion teeth. I believe you devide the two numbers and thats the ratio, but not totally sure. Good luck.

Feb 05, 2010 | 1999 Dodge Durango

1 Answer

I need to know what tools I'll need to change the front rotors on my 02 dodge durango

you will need the basic hand tools to do a brake job, and a big hammer to break the rotors free from the axel, they should just fall off but sometimes need some hammering to break the rust free

Nov 06, 2009 | 2002 Dodge Durango

Not finding what you are looking for?
2002 Dodge Durango Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides