Question about Fiat X1/9

Open Question

My dash visual on a 02 punto speedgear is selecting reverse then back to drive then reverse with a constant beeping sound but doesnt affect the box itself can u help ?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fiat punto automatic


time for a new box..

Jan 08, 2014 | Cars & Trucks

1 Answer

When I open the driver's door and take out the key from ignition, there is a constant beep different from the one I know and the dash board always flashing. What could be the solution.


The beeping sound is a warning sound that lets the driver know that a door is open and he shouldn't drive off. It is normal and nothing to worry about. Good Luck. george

Mar 30, 2013 | 2006 Mazda 3

2 Answers

2003 Montero Limited, will not go into 2w high . What is the most Common fault?


Yes larry is very correct.Try going in reverse.

On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

Constant beep even while driving and when i turn it off it still beeps unless i disconect the interior lighting fuse and plug it back in fuse # 8 i believe. if i leave the fuse out it makes a wierd sound...


1995 GrCher Orvis - I have now just started with the same problem. An incessent loud high pitched alarm sound. Identical fuse, ignition on/off, and ticking issues. Can start jeep, warning sounds as normal followed by incessent tone, I can remove fuse to get quiet, but then when I close the door I get the identical alarm sound, but with a slight pause. Tone. Tone, Tone, etc. I can't figure. Tore through all components of dash: to learn that the alarm seems to emminate from the transmission floor area, and is not in the instrument panel (f up #1) nor is it behind the dashboard (f up #2). I'm stuck now... Anybody got something for me? Is it a transmission warning?

May 28, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Need fuse location for 2002 jag xj8 for car lighter that shorted when penny fell into lighter, am not sure what else it affected also my back-up beep beep is now a long steadyt beep when in reverse,and...


Right hand side fuse box located at the heal of your shoe if you were sitting in the rear seat behind the passenger seat. its a 25 Amp fuse #14.

Apr 30, 2009 | 2001 Jaguar XJ8

4 Answers

Beeping noise from a 2000 Ford Expedition


Replace your air bag light. It's prob. burned out.

Apr 22, 2009 | 2000 Ford Expedition

2 Answers

Have a honda odessey 2000. needs a new DRL relay; but cant find it under the dash _any ideas _


the daytime running lights control unit is behind the glove box. You must first remove the glove box to access the control unit. However, the fuses that supply power to control unit functions are accessible in several fuse boxes. the No. 3 and 8 fuses (15A) and No. 14 fuse (40A) in the engine compartment fuse box, the No. 5 fuse (7.5A) in the driver's kick panel fuse box, and the No. 6 fuse (10A) in the passenger's kick panel fuse box all supply power in some way to the DRL unit. Other inputs that can affect the DRL system include a faulty parking brake switch, faulty combination light switch, faulty headlight relays or blown bulbs, and even the brake fluid float switch.

Apr 04, 2009 | 1997 Honda Odyssey

1 Answer

Can only go forward when red gearbox light come on dash


i know these have a common problem with the spindles from the gearbox locating into flyheel for corroding badly and seizing up sounds if you need new spindle to solve this problem also think you are catching it a early stage suggest getting this looked at.

Mar 07, 2009 | 2006 Fiat 124

1 Answer

1998 automatic fiat punto


another factor that could affect your problem is the hydrolic fluid. there is a valve body inside the gearbox which controlls the gears. so lets say the vavle that controlls first gear dont open then the hydrolic fluid wont activate first gear. i think when u revv the engine it is increasing the hydrolic pressure which is aiding the vavle to open. the problem could be in the valve controll modual.

Mar 07, 2009 | 1989 Nissan 240SX

1 Answer

I have a automatic fiat punto-when i put the gears


Sounds like you need a new gear box or you can get your old one reconditioned at a gearbox specialist. i think your ploblem occourd because you may of had no gearbox oil inside the gearbox

Mar 06, 2009 | 1989 Nissan 240SX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...