Question about 2003 Land Rover Freelander

1 Answer

Hey the license plate light went out in my 2003 land rover freelander, i took the two screws to take the cover off and now im looking at two bulbs how do i get them out and which fuse is it inside the car also

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

Fuse will be the same one as marker lamps, (sorry but I do not keep detailed info on every car model) as far as taking the bulbs out I am not sure what type they are some pull straight out others will turn a quarter turn. If you can get a bulb number off and get the new ones before you take them out this may help give you an idea of what exactly needs done to get them out. Good Luck!

Posted on Oct 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Land Rover Freelander that is stuck in Park. The stop light switch has been replaced with an autozone part, but it still does not work. The break lights are also not working.


This might help you. Otherwise, just find a mechanic you trust and have him or her check the brake light bulbs. It could also be fuse problems. Check the diagram for your lights or check your manual. http://forums.edmunds.com/discussion/5166/land-rover/freelander/freelander-transmission-problems

For your fuse box diagram:
http://carwiringdiagram.net/2002-land-rover-freelander-fuse-box-diagram/

May 31, 2015 | 2002 Land Rover Freelander

1 Answer

Left brake light housing


small compartment in boot behind light cluster acces panel

Jan 16, 2013 | 2003 Land Rover Freelander

1 Answer

How do I replace a brake light in a land rover freelander 2004 - does the glass cover screw off internally or externally. Are the brake light and tail light bulbs combined? Many Thanks David


If there are visable screws around the tail lite lens yes they come out and just screw off the bulbs socket than the bulb,,,If no visable screws than the should be a panel on in side of vehcle back side that comes out for access to the lights.

Mar 11, 2011 | Land Rover Freelander Cars & Trucks

1 Answer

Wanted to get an estimate on the cost to maintain a 2003 Land Rover Freelander?


I have friends running Freelanders. Some have spent virtually nothing on repairs and others have spent a fortune. Very hard vehicle to call. Look at Edmunds reviews perhaps. Is the previous owner available to recount his/her experiences? Some people (not a lot but Land Rover owners more than most) keep records of such things.

Mar 05, 2011 | 2003 Land Rover Freelander

1 Answer

How to replace LR2 Third Brake Light


The Freelander is Land Rover's entry-level crossover SUV. Unlike other Land Rover vehicles that use a traditional "truck," body-on-frame chassis, the Freelander is built on a unibody, front-wheel drive car chassis. The Freelander is sometimes known in the U.S. as the "LR2."

1 Purchase replacement bulb P21/5W, available at most auto parts stores and at any Land Rover
dealer.

2 Turn off engine and open rear cargo door.

3 Remove the two Torx screws from the side of the tail light assembly. Carefully pull the assembly
away and unplug the electrical harness.

4 Turn the assembly over to access the bulb modules. There are three separate bulb modules; the
top module should be the brake light.

5 Rotate the bulb module counterclockwise to release it from the tail light assembly. Push the bulb
down (into the module) and turn it counterclockwise to remove it from the module.

6 Insert the new bulb into the bulb module. Carefully push the bulb down and turn it clockwise.
Reinsert the bulb module into the tail light assembly and turn it clockwise.

7 Reconnect the electrical harness to the tail light assembly. Remount the tail light assembly and
replace the Torx screws.


Dec 26, 2010 | Land Rover LR2

1 Answer

Replace indicator bulb freelander td4 2005


For the front indicators look under the front wheel arch up towards the front light/indicators and you will see a small plastic panel this is to allow removal of the indicator bulbs

Mar 19, 2010 | 2003 Land Rover Freelander

1 Answer

How do i remove an alternator from a land rover td4? the alternator is disconnected but i can't remove it from the engine bay.


you will need to remove the under engine protection cover ,2 bolts at front 2 at back. or remove the inner wheel protection cover 3 screws.easier from underneath.

Oct 11, 2009 | 2003 Land Rover Freelander

1 Answer

2007 Land Rover Brake lights went out


I have not seen these yet but a DII or Freelander there should be a push tab on the back side of the light in the bumper. I suggest crawling underneath and looking at the underside where they mount and see if there is a push tab on one side of the light that you would push inward (toward the light) to release that side of the light. If not, look for a screw or nut. Hope this helps.

Mar 23, 2009 | 2002 Land Rover Freelander

1 Answer

Headlight bulb replacement 03 Freelander


Went to Halfords, spent £14.99 BOGOF & was shown how to do it!
So easy, girls - just undo cap, disconnect plug & unlock metal clip - remove n replace bulb, resecure clip, connect plug & put back cap! Saves you £4.99 a bulb!! DIY girls, just have your baby wipes handy lol

Jan 14, 2009 | 2003 Land Rover Freelander

1 Answer

Land Rover freelander hill decent


The hill descent switch wires have broken off on the switch.Pull down the gear lever cover and remove the micro switch ,solder the wires back on and refit.

Jul 04, 2008 | 2003 Land Rover Freelander

Not finding what you are looking for?
2003 Land Rover Freelander Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...