Question about 1995 Isuzu Rodeo

1 Answer

2nd 3rd gear slips can bands be adjusted? - 1995 Isuzu Rodeo

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

Again, most modern automatics don't have adjustment bands they are electro hydraulically controlled, in this case you did not even give a car make model or year. I have to assume it is automatic as that is not stated... But if it is a standard the clutch is slipping.... My suggestion is take it to a pro or exchange the tranny with a reputable rebuilder and a warranty.... Sorry and Good Luck!

Posted on Oct 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it taking long time to shift from 2nd to 3rd gear


have a pressure test done on the gear box to determine if the fault is mechanical. Have the bands and clutch packs adjusted . RTUN fault codes to check TCM problems.

Jan 01, 2014 | 2003 Land Rover Range Rover

1 Answer

My 93 chevy truck wont shift into 3rd gear. goes into reverse fine 1st and 2nd gear with no problems and no slipping just wont go into 3rd whats the problem?


I say band adjustment in transmission, have done by shop. might be just a vacuum hose or modulator, but I don't think so

Oct 03, 2010 | 1993 Chevrolet C1500

1 Answer

Trans slips between 2nd and 3rd shift


MV could be the problem. Always work thru issue before buying ANY can of additive. Generally those things just mask the issue..not fix it. Change your fluid,and if that doesnt correct it,then take it in and have the tranny bands tightened. most shops do this relatively in expensively.

Apr 28, 2010 | 1995 Ford Explorer

1 Answer

I have a 1997 ram 1500 5.9 2x4 and im missing 2nd gear it shifts at about 35-40 mph. When I changed my tranny fluid and filter I found what looked to me like one of the paper discs from a cluch pack now my...


Those paper disc are from you 2nd gear band. You will need to replace the band. The front band is the 2nd gear band. The first thing I would try is to adjust the band. If there is still some material left on the band adjusting it will get you by for a while. The adjustment for the 2nd gear band is on the outside of the case. If you want me to post the adjustment procedure, let me know and i will.

Apr 24, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Gear slipping between 2nd and 3rd


most shifting probs on the late model vehicles are caused by the shift solenoids or the vehicle speed sensors. look at that first, then figure out when you last had the trans fluid changed and the filter replaced, and the bands adjusted.

Jul 20, 2009 | 1995 Ford Mustang

4 Answers

96 chevy blazer 3rd gear and overdrive slipping


i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Jun 30, 2009 | 1996 Chevrolet Blazer

2 Answers

1998 subaru band adjustment for auto transmission.


It is on the left side hard to spot. Look below the heater hoses. Good luck, take your time and have a great day.

Jun 26, 2009 | 1998 Subaru Legacy

2 Answers

46RH transmission, no second gear.


Does it shift into 3rd at the right speed? If 2nd is just missing, try adjusting the kickdown band. (front band). The adjustment screw is on the outside of the case.

Apr 24, 2009 | 1999 Dodge Ram

1 Answer

Engine over-revs between 2nd and 3rd gear


they did not install bands right needs to be rebuild bands need to be adjusted

Dec 05, 2008 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

Not finding what you are looking for?
1995 Isuzu Rodeo Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...