Question about 1997 Chevrolet S-10 Pickup

1 Answer

S-10 Cranks but won`t start jumpacross ECM battery fuse to ECM IGN crank over will start and stay running could it have a bad ignition switch?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 921 Answers

How about fuse..is it bad?

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing a fuse engine wont start 2005 hummer h2


Is the anti-theft light lit on the instrument cluster ? Won't start how ? When you turn the key to start , what happens ? Nothing ? This would be a No crank - no start condition . Now if you turn the key to start and the starter engages and spins the engine and it doesn't start an run , this is a engine cranks no start condition ! Now which is your problem ?

There are two fuse's IGN A fuse 40amp and IGN E fuse 10amp ,both are located in the under hood fuse/relay box . Also there is starter relay located in the same under hood fuse /relay box . There also is a crank fuse 10amp in the under hood fuse box . Besides the fuse's and relay ,the ignition switch or the PNP - park neutral position switch could be bad . Testing the whole starter circuit should be done ! How to voltage drop test starter motor circuit

Jan 22, 2017 | Hummer Cars & Trucks

1 Answer

What can it be? my jeep won't start, it does not crank and the battery is good.


wow one of the first posts ever to say, it wont crank....
very clear that. Its silent.
but is it automatic transmission, ill guess yes.
  1. fuses good.??
  2. battery terminals not green with rust.?
  3. does it crank in Neutral, as the operators manual states??
  4. you do know that new batteries, can be DISCHARGED right?
  5. so does jumper cable jump starts to a running donor car crank now? AAA Tow style? (oops new battery was discharged , charge it now)
  6. no, then hot wire the starter solenoid ,with keys in pocket.
  7. cranks now? , then starter is good. (i just saved you cash)
  8. no it doesn't crank now, the starter is bad, or engine is seized. (hand turn engine to discover that fact)
  9. cranks hot wired? yes,. that means the key line is dead.
  10. the Key line can be dead for 3+ reasons, aftermarket alarms added or remote start bs added, or transmission park/neutral switch is bad or ignition switch bad.
  11. to find #10 it takes a $10 volt meter, are you game?

Aug 18, 2015 | 2008 Jeep Compass

1 Answer

Car cranks but wont start? No spark. Changed ecm relay no help. Ignition harness is good. No fault codes. Battery is good. changed ignition relay, no help. I think its the ECM but need more info to spend...


Yes, the ECM is the last thing to replace after all other possibilities. No spark could be bad ignition coil, bad Ignition Control Module (controls the coil circuits for spark), bad plug wires, the crank and cam sensors (for ECM to determine spark timing).

Check the ICM -it can be tested at a parts store. If good, check the crank sensor.

Mar 16, 2015 | Cars & Trucks

2 Answers

I crank my car it stays running as soon as I kill it it wont crank back why


Could be a fuel pressure regulator valve. A defective regulator will often produce enough fuel for start up when the car is cold but not after the vehicle has run for a while. Then regulator should be located on the the fuel rail under the hood. If this is the problem you can prabably remove the fuse to the fuel then crank the vehicle for a few second so that there is no pressure build up. Then replace you regulator and replace the fuse.

Feb 01, 2015 | 1996 Ford Explorer

3 Answers

I have a 2004 Chevy trailblazer no start no crank but if I put key on hot wire the starter it will start I replace new ignition switch and new starter relay b


Before you do any thing check for loose or bad connections. Also check you ground connection to engine. Check Fuses, relay and for a Fusible Link open circuit. Now let me explain what a Fusible Link does. They are short lengths of small gauge wire installed between the Battery and the Ignition Switch, or the Battery and the Fuse Panel. They'll melt and open the circuit before damage occurs in the rest of the circuit. I hope this was helpful you.

Aug 09, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

No power going to ignition control module, what would cause this?


Yes, the pink wire to the ICM and from the run/crank relay should have battery voltage in run or start. If not, check fuse 11, a 10 amp fuse in the Fuse Block-Underhood. Also check fuses 38- a 30 amp fuse supplying power to the run/crank relay, and fuse 9- a 10 amp fuse between the run/crank relay and the ECM. All of these fuses are in the underhood fuse block.
Fuse 38-the 30 amp fuse, the power feed for the run/crank relay- will be hot at all times. Fuses 9 and 11 will be hot in run or start. Check for power at the fuses. If the relay is not turning on and sending power to those fuses and to the ICM, and the ECM, (and to the injectors through fuse 16 - a 10 amp fuse), then work back to the ignition switch and the body control module. Wish I didn't have to say that, but yes, the BCM is between the ignition switch and the run/crank relay.
Good luck, Michael.

May 27, 2014 | 2003 Saturn ION

1 Answer

Won't start no spark


Check all your fuses, under the hood and at the fuse panel for ign fuse or ecm fuse and make sure they are'nt blown, then check for power to ign module which is under the coil paks, should be pink wire. good luck...sounds like maybe your ign module or crank sensor may have gone bad.

May 13, 2012 | 2002 Buick LeSabre

3 Answers

My 99 Gmc jimmy will not start. the fuel pump is good the fuel filter is not clogged, i replaced the neutral safety switch, plugged in my code reader no codes, i believe it is the starter or the ignition...


Does it crank or not? If no crank then look at the starter or ignition switch. If crank but no start then look at the ignition system. Check for spark at the plugs and also check the fuel pressure. If there is spark try spraying a little starting fluid into the intake. See if it starts and stays running. If it stays running reply back and I will explain why.

Sep 02, 2011 | 1999 GMC Jimmy

2 Answers

Hooked up battery cables backwards now my 200


check main fuse box for ign/inj/ecm fuses.

May 25, 2010 | 2000 Saturn SL

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

Related Topics:

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...