Question about 2007 Chevrolet Uplander LS Minivan

2 Answers

Remote will not work after replacing battery - 2007 Chevrolet Uplander LS Minivan

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 543 Answers

The remote may just be dead inernally, you probably need a new one,or try taking it to the dealer so they can try to reprogram it,if that does not work you will need a new remote and program $100ish

Posted on Oct 08, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

Battery upside-down , if not Dealer REPROGRAMING will Correct it Should NOT Be that way But Some Do this

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda CRV-EX 2003: remote not working. Battery OK. Hear attempt to open or close but door buttons wont operate. Hellllp!!


If you have replaced the batteries in you remote(s), and you can hear the locks attempting to work, your door lock actuator(s) maybe faulty. The actuators are not expensive, but the labor to have them installed can be.

Dec 15, 2014 | Honda Cars & Trucks

1 Answer

Mopar remote start stopped working


The remote start may now need to be reprogrammed because it needed a slight amount of power from the battery to remember the settings. Replacing the battery interrupted this. Check the manual that came with it.for instructions.

Feb 28, 2014 | Cars & Trucks

1 Answer

I have a Saab 2.2tid linear (2003). the central locking system has just stopped working completely, there was no warning to suggest its the battery in the key.. before it stopped working altogether it used...


THE SAAB 9 -3 REMOTE BATTERY HAS TO BE REPLACED AND REPROGRAMMED AT THE DEALERSHIP.THE SAAB 9 - 5 YOU COULD REPLACE REMOTE BATTERY AND REPROGRAM OR SYNCHRONIZATION BY PRESSING REMOTE KEY BUTTON UNLOCK BUTTON AT LEAST 4 TIMES TO REPROGRAM KEY REMOTE TRANSMITTER.

Mar 04, 2011 | Saab 9 3 Cars & Trucks

2 Answers

Remot not working


check and replace the battery on your remote especially if it is the stock battery the remotes are built to withstand alot of abuse but cold water or very hot dry heat can easily short them so if the battery doesnt work replace the remote at a suzuki dealer

Jan 09, 2011 | 2006 Suzuki XL-7

1 Answer

My garage opener remote on my 2003 santa fe just stopped working. How can I fix it?


There is a battery in the remote.If the battery gets old the remote will stop working.Replace the battery and check.Also if your battery is new but still the problem is there then,try to open the garage door by keeping less distance between remote as well as the garage door.Also there is a sensor in the garage door.If that sensor is not functioning then this can be one issue.In some cases the internal remote circuit gets short,in that case the remote needs replacement.But does the garage door sensor light shows any sign of getting connection from remote when you press the remote button.Open the door and try to close the door with remote and check.As per the problem,in most cases its weak battery related problem,and replacing the battery solves the problem.You can try all the possibilities and see which one helps.Thanks.Helpmech.

Nov 12, 2010 | 2003 Hyundai Santa Fe

2 Answers

Ford F150 remote key does not work after car battery


cbridges2232,

Any luck with your keyless remote issue? I'm having the exact same problem with my Ford F150 CrewCab after car battery replacement.

Oct 07, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Does any body know how to reset the ML350 alarm??....The remote control doesn't work after i replaced a new battery to the remote control. I couldn't even use the remote to lock/unlock the car. I was


SOME OF THE REMOTES REQUIRE THAT THE KEY BE IN THE IGNITION, IN THE ON POSITION. TAKE THE BATTERY OUT AND WAIT 10 MINUTES. THEN PUT THE KEY IN THE IGNITION AND INSTALL THE BATTERY WHILE THE KEY IS TURNED TO THE ON POSITION. HOPE THIS HELPS YOU. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

May 18, 2009 | 2007 Mercedes-Benz ML350

1 Answer

My remote for my pontiac g6 does not work


You can replace the battery, but as far as the remote, if it is a factory installed remote, you have to go to the dealer.

Jan 15, 2009 | 2005 Pontiac G6

1 Answer

Keyless remote works intermittently


replace the battery in your remote, or have it checked at autozone to make sure it's not just your remote.

Oct 24, 2008 | 1992 Buick LeSabre

Not finding what you are looking for?
2007 Chevrolet Uplander LS Minivan Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...