I NEED BELT ROUTEING GUIDE FOR 1989 7.5L FORD ENGINE ON A JOHN DEERE CHASSIS MOTOR HOME

here are two basic vacuum diagrams from a 390 engine, one or the other should work for you depending on your distributor vacuum advance setup. good luck

You should be able to get that by going to the website for Gates rubber and belts.

there should be a decal under the hood somewhere that shows the belt routing.

Click the "GET TO KNOW YOUR CAR" section under novice.


It will prompt you for the year make and model.


Then you will be brought to the Specifications section.


Click "EXTERNAL ENGINE"


Click "Belt Routing Diagram"


You can enlarge and print the diagram from there!!


Happy Motoring!


Zeppelinx12

The parking brake is activated by the shift lever. There is no parking paw in the transmission on these John Deere Chassis motor homes. The parking brake is the type that works a brake on the drive shaft. I ran into the same problem and just put a line lock on the brake line.

Go to daycoproducts.com, they have illistrations for just about every vehicle. When you get to the Home page click on 'cars and light trucks" then on "belts" then on "serpentine belts". Then, go to the right side of the page and click on "belt routing guide" find your car, then get the illistration number. Close out that page and got "belt routing guide illitrations" go to the illistration number for your car.

Here are two links to take you to the serpentine belt diagrams... choose your engine type.

V6-24 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S5021
V6--12 valve engine
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

You didn't list your motor size so please pick the applicable diagram:


Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines


Accessory serpentine belt routing—5.7L engines with A/C


Accessory serpentine belt routing—5.7L engines without A/C


Accessory serpentine belt routing—6.5L Diesel engines


Accessory serpentine belt routing—7.4L engines


Accessory serpentine belt routing—8.1L engines

2002 FORD TRUCK WINDSTAR 3.8L SFI 6CYL REPAIR GUIDE

Drive Belt Routings



Fig. Accessory drive belt routing-3.0L engine




Fig. Accessory serpentine belt routing-3.0L engine




Fig. Accessory serpentine belt routing-3.8L engine


I hope help you with this. Good luck.

You didn't post the motor size which would help so please choose the one that will work for your application:

Alternator and water pump pulley belt routing — 1.8L engine


Drive belt routing — 1.9L engines