Question about 2003 Chevrolet Impala

1 Answer

Car will not start Will not crank.

Car will not start Will not crank. Can not unlock doors with remote It beeps and turns lights on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

Look for padlock flashing in the digital display after you try and start car and leave ky igition on if you see it flashing the you need to change either the security sensor in the ignition switch or BCM. not with seeing car, good luck

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Factory remote start wont work. hit button horn bbeps all lights and radio come on. when horn beeps second time car wont crank as it always has in the past


Ford Keyless Remote Car Starter fix - YouTube

? 5:14
https://www.youtube.com/watch?v=fQHb0mU0rvI
Jun 24, 2012 - Uploaded by mitch cox
I bought a 2010 Ford Raptor my remote starter won't work? when I press the .... 2013 lincoln navigator, 2-Way Remote StartSystem and i press button ... a Ford OEM 1-Way 100 Series Keyless Remote Start (CM5Z-19G364-A).

1998 to 2008 Lincoln Navigator Factory Transmitter Remote ...

? 3:00
https://www.youtube.com/watch?v=sLMN34KN3nY
Nov 2, 2012 - Uploaded by Lessco Electronics
1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door ...

2008 Lincoln Navigator Remote Start Accessories ' Th




Dec 12, 2015 | 2008 Lincoln Navigator

1 Answer

Reset computer


If you pushed the car by the door itself or swung the door open hard, you could ha e stretched the door harness and pulled wires apart. There is a little accordian styled boot that 'protects, the wire loom leading to the driver door electronics. I wonder if you have noticed your alarm horn doesnt beep when locking the doors from the remote. Or you can only lock and unlock the driver door only from the driver door. If thats the case there may be an open in the wires leading to the door lock actuator; which controls things like lock/unlock functions of all doors and windows, door warning lights, etc. Have the harness repaired

Oct 07, 2013 | 2001 Volkswagen Jetta TDI

1 Answer

I recharged the battery recently because the car didnt start. Got the battery on again and now the car makes a beeping sound every time. I try to start the car but nothing happens. Help please!


use remote to disable the alarm or close drivers door turn key in door lock lock and unlock car 3-5 times if you do not have an alarm remote to said car this will disable the alarm system

Jan 04, 2013 | Cars & Trucks

1 Answer

I changed battery and now it dosnt work


You lost your program of the key module follow these instructions.

To Program a Remote for a VW
Put your good key in the ignition and turn to "ON", do not start the engine. Make sure all the remotes you want to use are present because they have to be programmed at the same time.
- Close the door and insert key #2 into the driver's side lock. Lock the door.
-Within 5 seconds of locking the door, press unlock 2 times on the new remote, key #2.
-(if this is remote #3, press unlock 3 times. if this is remote #4, press unlock 4 times).
-If there's a chirp or beep do not press it again. This means that the car has recognized the new keyless entry remote.
- Repeat with other remote or unlock the car and turn off - done.

Mar 23, 2010 | 1996 Jaguar Vanden Plas

2 Answers

My alarm wont turn off. my car wont start. its a 2004 tiburon.


With alarm activated your ignition is disabled.Find the combination to disable it.With GM's you hold opposing buttons on the fob till it beeps twice. The dealer should help for no charge.

Feb 28, 2010 | 2004 Hyundai Tiburon

2 Answers

Key remote wont work even with new batteries


The remote likely needs to be reprogramed. If you have both remotes you will need to take these to the dealer and have them reprogramed.

Jan 25, 2010 | 2000 Volkswagen Beetle

1 Answer

1996 Dodge Avenger Security System went crazy now car won't start


try to put the key in the ingnition and turn it to the on possition and walk away for about 15 min come back turn it to off and see iff it starts

Dec 30, 2009 | 1996 Dodge Avenger

1 Answer

Lost original car alarm control... need to reset a new one...



programing a Nissan remote , is hidden secret by Nissan Dealers. As a Nissan Technician i will share it.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.

Oct 29, 2009 | 2002 Volvo S40

1 Answer

Cables or what?


if you sure with our electrical n electronic system, then please have a check about your machanical system, viz. engine cylinder, crank shaft.

and also sometimes in some car, if the car is locked by remote key system, n unlocked through door keys. car do all functions except starting of engine. have a look into it.

Aug 25, 2008 | 1997 Honda Accord

Not finding what you are looking for?
2003 Chevrolet Impala Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...