Question about 2006 Subaru B9 Tribeca

1 Answer

My cruise light is blinking on and off, although cruise is not on, and my check engine and traction control warning lights are illuminated. I just had brakes worked on last week, could they have done something to it - it's been fine until today (about 6 days after being repaired)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 543 Answers

Well the cruise light is blinking probably becuase its telling you its notworking due to the fact the abs/traction lights are on,youre saying you just got a brake job done, i would guess either they unplugged the abs sensor to gain acess to the brakes or the sensor for the abs got dirty when they disrupted the brakes by removeing them to do the brake job, first thing i would do is peek at each wheel and see if the abs sensors are plugged in, if they are the next thing i would do , is remove each of the front sensors and clean them with brake clean or something like that,,the sensors are little magnets and sometimes when working in that area rust and dust and stuff gets on them and interupts the signal and casues all the problems you have list,,,,hope that helps,,,or take it back to where you got the brakes done and tell them about it and they should look at it and maybe fix it for free ,,,

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT DOES EPC STAND FOR ?


"Engineering, Procurement, and Construction" (EPC) is a particular form of contracting arrangement used in some industries where the EPC Contractor is made responsible for all the activities from design, procurement, construction, to commissioning and handover of the project to the End-User or Owner.

In case of cars:
The EPC indicator is a standard in Volkswagen and Audi models. These vehicles have drive-by-wire systems that are computer-controlled. When a fault exists with the throttle pedal, throttle body, traction control and cruise control, the EPC warning light illuminates. In many instances, the vehicle's throttle may be limited when this light is illuminated in order to protect the engine. Often, there is just enough power enough to get the vehicle to a service facility for repairs.
http://electronicshelponline.blogspot.com/

Sep 19, 2016 | 2009 Audi A3

2 Answers

Check engine light on traction control light on cruise light blinking whats wrong?


When you have a check engine light come on, the traction control light and the cruise lights both come on as well. You need to have the codes checked with a scanner. There most likely isn't a problem with the traction control or cruise systems, the lights turn on because those systems work together with the engine management system or PCM. When there is an engine problem that sets a code that turns on the check engine light, it automatically disables the cruise control and traction control for safety reasons. Because the last thing you want is to have an issue with traction control and/or cruise control if your engine is having an issue, which is why they are disabled. The most common problem that turns on the check engine light is a loose, cross-threaded, or snug but not tight enough fuel filler cap. Subaru recommends three clicks of the cap to be considered tight. Also, any parts store can and will check and/or clear codes for free. I hope this info helps!

Sep 08, 2014 | 2011 Subaru Impreza

1 Answer

Why would engine light,cruise control and abs light come on?


hello,do post your DTC'S,(diagnostic trouble codes) and may be i can help.many modern vehicles spring up a multitude of warning icon's on the dashboard,much to the alarm of it's owner,however,often it can be as simple as a dirty wheel speed sensor,which fails to provide the necessary information to the main (ABS/TRACTION control unit) and so then will inhibit the cruise control,as naturally it's unable to ascertain road wheel speed,and also throw up the engine management light,as the braking/traction control systems unable to supply correct information to the main engine computer(ECU,OR PCM) electronic control unit/power control module. hope this helps,but please supply any further information that you can,regarding your DTC'S, that are read out,try to get a full print off,if at all possible, cheers.

Jun 25, 2014 | 2006 Subaru B9 Tribeca

1 Answer

ABS and Traction Control failure with check engine and steering lights additionally illuminated


look listen and dance not matter how you performance keep it calp and trust it

Feb 20, 2014 | 2008 Volkswagen Rabbit

1 Answer

Warning lights remain illuminated, Alero


First check for error codes (DTCs) to see if you can determine the problem.

Apr 16, 2017 | 2000 Oldsmobile Alero

1 Answer

Warning lights remain illuminated, Alero


does the anti-lock brake light come on too? and ive found the best way to reset codes manually is disconnect the battery terminals pos. and ground. then touch them together( the battery cable terminals) their is a copasitor that will store enough power to hold your codes in the ecm. this way you are essentially grounding the system to drain all residual power stores

Feb 09, 2012 | 2000 Oldsmobile Alero

1 Answer

I have a 2004 grand prix 3800 engine non turbo. Engine was eratic at cruise with rpms at 1200-2000. rpms would lope 2-300 rpms. I Changed air and fuel filter, and cleaned the throttle body. also checked...


i had a problem with all my lights coming on in my 2006 explore took it to dealer to find out that the battery was dying replaced it and they went away

Mar 26, 2011 | 2005 Pontiac Grand Prix

1 Answer

Electrical malfunctions in 2006 GMC Envoy XL


Check your ignition switch by checking the voltage at the fuses for affected circuts vs. other circuts that are working well...

Jun 21, 2009 | 2006 GMC Envoy Xl

Not finding what you are looking for?
Cars & Trucks Logo

730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...