Question about 2003 Ford F150 Regular Cab

1 Answer

03 harley f 150 and check engine code came up 171 bank 1 system 2 lean. is this the downward passenger side o2 sensor and if so where is it located and does it take a special tool to change? thanx, steve

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Bank one,sensor 1 O2 sensor is on the pass side.The first one in the headpipe/exhaust manifold. If you can get a 7/8 wrench on it,you should be able it remove it. You might have to borrow an O2 sensor socket. It has a slot through it to get it over the wire.
Hope this helps!

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does code p1131 mean on a 2001 ford taurus


P1131 Ford
P1131 Ford - Lack of Upstream Heated Oxygen Sensor Switch Sensor Indicates Lean Bank 1

Repair Importance Level: 3/3

Repair Difficulty Level: 2/3

http://engine-codes.com/p1131_ford.html

Forum Code

Possible causes

- Faulty Oxygen Sensor

- Vacuum leak affecting bank 1 only

- Fuel injector problem bank 1

- Check for cylinder misfire on bank 1

- Engine mechanical condition

Tech notes

Though the Oxygen (O2) sensor, the Engine Control Module (ECM) has detected a lean system, which means that there is either not enough fuel or and excessive amount of air in the system. Start by checking for vacuum leaks.

When is the code detected?

The Engine Control Module (ECM) detected bank 1 oxygen (O2) at its lean limit

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

P1131 Ford Description

A Heated Exhaust Oxygen (HO2S) sensor indicating rich at the end of a test is trying to correct for an over-lean condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.

Read more: http://engine-codes.com/p1131_ford.html#ixzz3izk89wMu

Aug 16, 2015 | Ford Cars & Trucks

1 Answer

Please tell me what this means,,, po171 band 1 system too lean and po174 band 2 system too lean, thank you, jill


PO 171--is an O2 Sensor Code for a Lean Condition
on Bank 1 (right side exhaust)

PO 174 -- is an O2 Sensor Codes for a Lean Condition
on Bank 2 (left side exhaust)

You gave us no vehicle
You gave us no drivability issues or
vehicle history,nothing

If the O2's have 100,000 miles on them,change the (2)
closest to the engine. They are most likely worn out
& the switching times are too slow to control injector
pulse width & thus set a MIL Lamp (OBD2 Fault ) on
your dash

You can learn a lot on the internet if you put OBD2 in your
Search Engine (Internet Explorer,etc)

Jul 15, 2011 | Lincoln Town Car Cars & Trucks

2 Answers

Error codes po 134 po 153 po 154 po 155 po 171 po 174


PO 134 = 02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR1)
PO 153 =02 SENSOR CIRCUIT SLOW RESPONSE (BANK 2 SENSOR 1)
PO 154 =02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 2 SENSOR 1)
PO 155= 02 SENSOR HEATER CIRCUIT MALFUNCTION (BANK 2 SENSOR 1)
PO 171= SYSTEM TOO LEAN (BANK 1)
PO 174= SYSTEM TOO LEAN (BANK 2)
I WOULD SAY YOU HAVE FAULTY OXYGEN SENSORS CAUSING THE ENGINE TO RUN TOO LEAN REPLACE THEM AND YOU SHOULD BE BACK IN BUISNESS

Feb 23, 2011 | 2004 Suzuki Grand Vitara

1 Answer

2006 hundai elantra P2270 code. If this is an O2 sensor, which one?


Possible O2 sensors:

P2270 O2 Sensor Signal Stuck Lean Bank 1 Sensor 2
P2271 O2 Sensor Signal Stuck Rich Bank 1 Sensor 2
P2272 O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
P2273 O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2274 O2 Sensor Signal Stuck Lean Bank 1 Sensor 3
P2275 O2 Sensor Signal Stuck Rich Bank 1 Sensor 3
P2276 O2 Sensor Signal Stuck Lean Bank 2 Sensor 3
P2277 O2 Sensor Signal Stuck Rich Bank 2 Sensor 3
P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
---
This is Bank 1 (closer to the dash panel) Sensor 2 (located after the catalytic converter).

---
Note: A malfunctioning front oxygen sensor may cause fuel trim codes to set.
  1. Several Diagnostic Trouble Codes use specific terminology to refer to sensor location. The illustration and key below explain the following terms:
  2. Engine BANK Bank 1 is closer to the dash panel, (also referred to as RH or right hand). Bank 2 is closer to the radiator, (also referred to as LH or left hand).
  3. UP Refers to Sensor 1 or "front sensor". It is located closer to the exhaust manifold and before the catalytic converter.
  4. DOWN Refers to Sensor 2 or "rear sensor." It is located after the catalytic converter.
  5. The following examples show how to interpret oxygen sensor terminology:
  6. B1/S1 = Bank 1/Sensor 1 = Dash panel side, BEFORE the catalyst or "upstream"
  7. B2/S2 = Bank 2/Sensor 2 = Radiator side, AFTER the catalyst or "downstream"

Aug 06, 2010 | Hyundai Elantra Cars & Trucks

2 Answers

Codes P0171, P0174, P0440


This is usually an oxygen sensor, replace the O2 sensor located above the catalytic converter before replacing the evaporator purge canister.

Dec 29, 2009 | 2000 Chevrolet Silverado

2 Answers

Code 171 and engine light is on


--BANK 1 = DTCs P0171 (lean) and P0172 (rich)

-Check intake air system for leaks, obstructions and damage.
-Check air cleaner element, air cleaner housing for blockage.
-Verify integrity of the PCV system.
-Check for vacuum leaks.

I would try cleaning the Mass Airflow Sensor first. A dirty Mass Airflow Sensor is a common problem for triggering PO 171 & 174 codes.

Good luck and keep me posted.

Oct 21, 2009 | Chevrolet Colorado Cars & Trucks

1 Answer

O2 sensor location 1997 pontiac grand am 2.4 4 cyl auto trans


BANK 1 SENSOR 1 IS THE ONE IN THE EXHAUST MANIFOLD. BANK 2 SENSOR 2 IS BELOW THE CATALYTIC CONVERTER.

P0171 SHOULD GO AWAY WITH A GOOD O2 SENSOR BUT DO CHECK FOR VACUUM LEAKS TO BE SURE. 3.1/3.4L ENGINES HAVE A BAD DESIGN INTAKE MANIFOLD GASKET, THE LEAK OIL, COOLANT, AND AIR.

Jul 13, 2009 | 1997 Pontiac Grand Am

2 Answers

OBD Code says ''Lean Bank 2 - System too lean


Bank 2 is generally the passanger side. Recently, We have run across a few system to lean codes in Fords. We have ended up changing the O2 sensors.

May 28, 2009 | 1999 Ford F150 Regular Cab

2 Answers

4 codes P0171,P0174,P2195,P2197


Hi
171 system too lean
174 system too lean
2195 - 02 ozygen sensor signal stuck lean Bank1 Sensor 1
2197- 02 ozygen sensor signal stuck lean Bank 2
Sensor 1
The 2 front 02 sensors are located on the front of
the exhaust manifold.
Should solve problem and increase gas mileage.

Apr 01, 2009 | 2003 Ford Expedition

1 Answer

Codes #171 & 174


first check out for o2 sensor if its faulty this can show up.but if its proper.Evaporative emission control system leak very small 171 System too lean (bank 1) 174 System too lean (bank 2) 

Jan 05, 2009 | 2004 Ford F150

Not finding what you are looking for?
2003 Ford F150 Regular Cab Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...