Question about 2000 Mazda 626

1 Answer

Mazda 626 hold light flashes

The hold light intermittently flashes as the car is being driven and the engine revs go down, but when is stopped for 10 minutes or so with engine stopped, the car car drives normally with the light not flashing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

It's probably the problem with the sensor failure or the switch fails to completely off the current flow, it's a miner issue so for hazel free drive do visit the nearest MAZDA authorized service station or see for a good skilled & experienced mechanic who may sort out this problems so till the next this is siddhesh saying bye for now feel free to ask any quires regarding automobile field we will be happy to help you so till the next time have safe drive & happy motoring.

Posted on Oct 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

As driving the car, the Engine suddenly stops for a fraction of second (speedometer going down to zero and back up in speed) with the yellow Engine sign flashing (intermittently).


If the engine sign is flashing it usually means that the car needs IMMEDIATE ATTENTION. Put a code reader on the computer see what code it's calling out then go from there, it could be your TPS, IAC or your fuel pump, FP regulator or any of the associated wiring.

Mar 18, 2016 | Maruti Cars & Trucks

1 Answer

Wiring diagram for temp sensor on 92 mazda 626


Please help...me,,....I have one mazda 626 2 liter v6 DOHC
my problem is this car can go up to 65 km only...the engine will stop if I pull the trottle more.during idling..rpm only can rev up to 3500 if more the engine start koff and jerking...then off

Sep 18, 2013 | Cars & Trucks

1 Answer

1993 mazda 626 auto, starts fine when cold, but not when I've driven it for a while.


I would start with a good tune up, including the intake gasket. Changes in temperature could cause gaskets to stop sealing properly letting unmeasured air inside the engine. Also check for fuel filter.

Mar 26, 2013 | 1993 Mazda 626

1 Answer

1999 Mazda 626 starts but when put in any gear engine dies


Then you will have to have it towed to a shop

Dec 17, 2012 | 1999 Mazda 626

1 Answer

Check engine light flashing in 2006 chevy hhr


If it is running rough & no check engine light on then the first thing I would to is tune it up. If you have a check engine light then pay someone to diagnosis it & go from there. Usually when the light comes on there is a more promenient issue; that is WHY the light continues to flash.

Oct 01, 2012 | 2006 Chevrolet HHR

1 Answer

My1991 mazda 626 will not rev up over 3000 rpm


DO YOU MEAN WHEN YOU ARE ACCELERATING? Or do you mean sitting and reving the engine? If you are just reving the engine in park then the rev limiter is kicking in.

Feb 07, 2012 | 1991 Mazda 626

1 Answer

I replaced the idle air control valve i drove for 34 miles everything was fine but, then i had to stop to get some gas and then the light turn back on......why is that? how do i correct the problem?


iac needs to be syncranized to computer reve engine to just below rev limiter where engine goes up and down hold for two minutes (sounds like engine is blowing up but isnt ) do this twice for two minutes with the light out

May 28, 2011 | 1997 Chevrolet Malibu

1 Answer

1994 Honda Accord 4 Speed Automatic - Car will not start after being driven for 10-25 minutes. If car sits for 10-15 minutes or sometimes longer car will then start. Car has also died at a stop light and...


Sounds like your catalic converter is trying to stop up. When you drive it this heats up and causes your car to vapor lock and quit running you let cool down and it will start back and run for a while. You can take it to a muffler shop and they will check it for free. This could be any number of issues but this is where i would start.Best of luck to you, Thank's for using Fix Ya.

Apr 19, 2011 | 1994 Honda Accord

1 Answer

My 95 mazda 636 revs up n down with idling or neural .. why is this ?


Most common cause is a faulty throttle position sensor. The next one in line is a bad mass air flow sensor or bad egr. The only way to know which is to pull the codes. If the check engine light is on or even flashed aside from when starting the vehicle then the computer has retained a code. Most auto part store can pull the code for free.

Feb 12, 2011 | 1995 Mazda 626

Not finding what you are looking for?
2000 Mazda 626 Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...