Question about 2000 Chevrolet Cavalier

3 Answers

Installation of new serpentine belt on 2002 Chevy Cavalier

Is there an installation process? I can't seem to install the new one - not enough slack. Is the tensioner supposed to move?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Use a 3/8" socket end to rotate the tensioner counter clockwise. It may seem stiff, but that's a good thing... you want the tension to be there. After it's off the tensioner the belt will pretty much just come out of place and off the other pulleys. ***make sure you orientate the belt as it was originally (ac or w/ ac)...diagram should be on the front shroud.

Posted on Oct 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sepertine belt continues to pop off what might be the problem

Posted on Jul 09, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 74 Answers

The slack pully is tough to move might need to use a cheater bar

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace the serpentine belt on a 1995 Buick century 4 cylinder?


This is the advertised procedure:

REMOVAL & INSTALLATION

Except Serpentine Belt
It may be necessary to loosen more than one pulley or remove another belt to access the drive belt, such as the power steering and air conditioning.
  1. Loosen the driven accessory's pivot and mounting bolts.
  2. Move the accessory toward or away from the engine until there is enough slack in the belt to slip it over the pulley of the driven accessory.
  3. Remove the belt from the engine.
  4. Install the new belt and move the accessory toward or away from the engine until the tension is correct. You can use a wooden hammer handle as a lever, but do not use anything metallic.
  5. Adjust the belt tension, then tighten the bolts.
Serpentine Belt
  1. Place a tool over the tensioner pulley axis bolt.
  2. Rotate the tool counterclockwise to relieve belt tension.
  3. Remove the drive belt.
  4. Carefully release the tensioner pulley and remove the tool.
To install:
  1. Route the belt over the pulleys, except tensioner.
  2. Place tool over tensioner, rotate counterclockwise and install belt.
  3. Remove the tool, then check alignment of tension and belt.
25367323-4c3ev5g3hggqhbcvosjrywtf-3-0.jpg

Jan 13, 2015 | 1995 Buick Century

1 Answer

Need to install airbags. direction on how to install front passenger airbags in a 2002 chevy cavalier


Hello! The removal and installation of an Air Bag is a multiple step process that exceeds our ability to send these procedures via a comment...I would suggest that you purchase a repair manual ( I believe AutoZone sells them for $15)...Also, due to safety issues, It would be best using the manual...

Guru...Saailer

Nov 04, 2011 | 2002 Chevrolet Cavalier Coupe

2 Answers

How do you get serpentine belt off?


Hope this helps:

Removal & Installation
  1. Remove the air cleaner outlet pipe.
  2. Rotate the drive belt tensioner clockwise and remove the drive belt.

b7f605c.gif

Rotate the drive belt tensioner clockwise and remove the drive belt



To install:

  1. Installation is the reverse of the removal procedure. Make sure the belt is routed properly

3e766f1.gif

Accessory serpentine belt routing-Ford 4.6L, 5.4L, and 6.8L engines with A/C



daf24f8.gif

Accessory serpentine belt routing-Ford 4.6L, 5.4L, and 6.8L engines without A/C



Please let me know if it's diesel because the routing is different.

Sep 24, 2010 | 2002 Ford Expedition

1 Answer

How to install Serpentine Belt


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2002 GMC Envoy. Plus Instructional and Directional Diagrams you will find very useful.

http://www.2carpros.com/car_repair_information/year/2002/make/gmc/model/envoy/2002_gmc_envoy_drive_belt_routing_diagram.htm

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Mar 30, 2010 | 2002 GMC Envoy

1 Answer

Ho is the power steering belt on 2002 chrysler


Click on the following direct Link. It has the Belt Diagrams you will need, complete with Removal Diagrams and Directions. It also has numerous other helpful diagrams for use.

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2002/make/chrysler/model/sebring/2002_chrysler_sebring_drive_belt_routing_diagram.htm

Mar 25, 2010 | 2002 Chrysler Sebring

1 Answer

Cant get serpentine belt on my truck


Try putting the belt on the alternator then slide it under the idler pulley last.

Feb 23, 2010 | 1994 Ford Ranger Supercab

1 Answer

How do you replace a serpetine belt on a 2002 chevy tahoe


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


Click on the following direct Link. It has the Serpentine Belt Diagram for the 2002 Chevy Tahoe for your specific engine and options (AC/No AC etc.). It has other additonal diagrams for your future use. It also has some diagrams on how to rotate/move the Tensioner Pulley/Arm to loosen and remove the Belt.

Standard Rules to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2002/make/chevrolet/model/tahoe/2002_chevrolet_tahoe_drive_belt_routing_diagram.htm

Feb 22, 2010 | 2002 Chevrolet Tahoe

1 Answer

Change a serpentine belt on a 1996 chevy cavalier


Diagram should be under the hood
The auto tensioneris down low and dificult to get to.
If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
hook up the serpentine belt tool and then mount the new belt

Jan 17, 2010 | 1996 Chevrolet Cavalier

1 Answer

Serpentine belt


there should be a digram under the hood some where if not parts store should be able to help
you there.

Sep 24, 2009 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
2000 Chevrolet Cavalier Logo

1,559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...