Question about 2006 Saturn ION

1 Answer

How to replace oxygen sencer for 2006 saturn ion

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saturn Master
  • 2,984 Answers

Installation Removal & Installation

  1. Remove the heat shield.
  2. Note the routing of the Heated Oxygen Sensor (HO2S) electrical harness.
  3. Disconnect the HO2S electrical connector.
  4. Using a suitable Oxygen sensor socket remove the sensor.
To install:

NOTE A special anti-seize compound is used on the HO2S threads. The compound consists of a liquid graphite and glass beads. The graphite will burn away but the glass beads will remain, making the sensor easier to remove. New or service sensors already have the compound applied to the threads. If the sensor is removed and is to be reinstalled, the threads must be coated with an anti-seize compound before reinstallation.

  1. If reinstalling the old HO2S, coat the threads with anti-seize compound.
  2. Carefully install the HO2S to the pipe. Tighten the sensor to 22 ft. lbs. (30 Nm) on the sensor located at exhaust manifold, or 30 ft. lbs. (41 Nm) for the rear oxygen sensor.
  3. Attach the sensor electrical connections.

Posted on Oct 08, 2009

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace a thermostat on a 2006 saturn ion 2.2L?


Google 2006 Saturn ion thermostat replacement. The link won't paste for some reason

Nov 13, 2016 | Saturn Cars & Trucks

1 Answer

How to replace a camshaft sensor


2006 Saturn Ion Camshaft position sensor location:
The camshaft position sensor is located in the top left side of the valve cover.

Feb 10, 2015 | 2006 Saturn ION

1 Answer

Po135 on 2006 saturn ion


follow the exhaust its the 1st 1

Jun 06, 2012 | 2006 Saturn ION

1 Answer

My saturn 2006 Ion could not be aligned properly today. The mechanic stated it has suspension damage. I need to know what might need replacement or repair. The car pulls to the right, and I had just...


to give you the best and correct info, one would need to do a full visual insection of the car,worst case is a twisted chassis,best is a worn bush(any)best of luck with the dealer,

Jul 02, 2010 | 2006 Saturn ION

2 Answers

What fuse box and location is the power windows fuse at on a 2006 saturn ion


The fuse box in the 06 ion is under the floor covering on the drivers side seat. Just move the seat all the way to the rear and then starting in the front near the pedals pull up the floor covering which is attached by velcro.
Regards, Joe

Nov 20, 2009 | 2006 Saturn ION

1 Answer

Does a 2006 saturn ion 3 have a timing belt or a timing chain?


2006 Saturn Ion Quad Coupe 2dr Cpe Ion.1 Base Manual
2.2L DOHC SFI 16-valve L4 Ecotec engine
Steel timing chain

Nov 08, 2009 | 2006 Saturn ION

1 Answer

Match color coded wires


Ask the person who sold you the sensor. They should have the info. Ebay sellers frequently post connection info on their web sites.

Sep 26, 2009 | 2004 Saturn ION

1 Answer

2006 saturn ion 2.2L engine code came up for EVAP purge/vent


replace your pvc vavle then have your cars underbody washed

Mar 15, 2009 | 2004 Saturn ION

1 Answer

Oxygen sensor location on a 2003 Saturn Ion-1


One is front of the cat, and one after the cat of the exhaust.
The OBD Scanner should tell you which bank is producing the error.
Bank one is the front one.

Thanks for using FixYa - a FixYa rating is appreciated!!

Feb 21, 2009 | 2003 Saturn ION

Not finding what you are looking for?
2006 Saturn ION Logo

1,321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...